SCANFLEX II CUBE is the latest generation of modular JTAG/Boundary Scan controllers developed by GOEPEL electronic.. Based on the latest multi-core processors and FPGAs, SCANFLEX II CUBE opens new ways for the Embedded JTAG Solutions. This test and validation method uses embedded instruments to test and program complex boards.

State-of-the-art test technologies, powerful test bus simulation for vehicle networks and a broad array of test technologies will all be paraded at Embedded World 2017 (March 14-16) by GOEPEL electronic.

With basicCAN6153.STM GOEPEL electronic has introduced a stress and trigger module for CAN FD. It is specifically capable of manipulating CAN / CAN FD communication enabling accurate protocol tests. The functionality is available as an extended option for the Series 61 communication controllers.

GOEPEL electronic has extended its strategic partnership program GATE (GOEPEL Associated Technical Experts) by adding Enics Group, one of the largest electronics manufacturing services provider within the Industrial Electronics market, as a new member. Focus of the cooperation is on the development and practical implementation of new solutions, products and modules based on JTAG/Boundary Scan instrumentation as well as enhancements in the lo...

The Embedded Test and Diagnostics Operating System JEDOS is now available for processors of the i.MX6 family from NXP. With this, functional circuit tests can be performed in real time using the native processor. The use of special test software or firmware is completely omitted.

Continental Automotive USA has opted for two X-ray inspection systems from GOEPEL electronic. At the production site in Seguin (Texas), highly complex assemblies for the automotive industry are manufactured. The inline inspection system “X Line•3D” performs automatic quality inspection of solder joints and components using 3D X-ray technology. These Automotive assemblies are subjected to particularly stringent quality requirement...

The boundary scan integration in the flying prober 4060 from SPEA is being expanded to the ability of panel test. Thus, panels with several boards can now be tested and also use the whole performance of the interactive test. The combined test of flying probe and boundary scan tests every board and collects all results in a joint protocol. This allows an ideal use of the flying probe resources within the boundary scan tests and offers as a consequ...

The VarioTAP emulation technology from GOEPEL electronic is now available for the RH850/F1L group of microcontrollers (MCU’s) from Renesas Electronics. Thus, it is possible to operate the processor via the native JTAG debug port as a design-integrated test and programming tool.

The range of processor emulation tools from GOEPEL electronic has been extended for the Nordic Semiconductor nRF52 series, thus enabling the processor to be reconfigured to provide design-integrated test and programming instruments via the SWD port. A respective VarioTAP model, as part of an extensive IP library, contains all relevant access information for the target processor.

The availability of ChipVORX model libraries for Bit Error Rate Test (BERT) using SoC FPGAs of the Altera Arria V series to support embedded test and embedded programming has been extended by Goepel electronic. ChipVORX is a technology for universal control of Chip Embedded Instruments via JTAG port.

Completely frictionless and maintenance-free with minimised footprint and unsurpassed inspection speed, GOEPEL electronic has unveiled MultiCam Line, its newest inline AOI system. Based on the unique multi-camera image acquisition module MultiEyeS, it provides placement inspection of THT components with a test speed of up to 300 cm²/s.

GOEPEL electronic has launched MultiCam Line, an inline AOI system. Based on the  multi-camera image acquisition module MultiEyeS, it provides placement inspection of THT components with a test speed of up to 300 cm²/s. The camera module consists of multiple cameras arranged in a matrix-like configuration with a combined resolution of 120 megapixels. 

The X-ray inspection system X Line 3·D from GOEPEL electronic is designed to enable reliable inspection of THT and Pin-in-Paste solder joints in compliance with the IPC quality standard through a unique combination of 3D X-ray (AXI) and 2D AOI inspection. This level of inspection is particularly important for automotive assemblies which are subject to strict quality requirements.

The range of processor emulation tools from Goepel for the “Jacinto” DRA74x series of Texas Instruments has been extended. These libraries, known as VarioTAP models, are structured modularly as intelligent IP and allow a complete fusion of boundary scan test and JTAG based emulation.

GOEPEL electronic has entered into close partnership with the Chinese technology company Pansino Solutions for distribution of automotive test products. This cooperation will meet the growing demand for test systems, diagnostic tools for automotive ECUs and simulation systems for electrical vehicle components in the Chinese area.

A new software tool from GÖPEL electronic allows test programs to be automatically generated from analogue/digital designs. The mixed-signal test generator automates test sequences which until now have been generated manually, dramatically reducing the overall conditioning and parametrisation work involved. As a result, project creation is safer, more effective and more flexible.  

Test solutions from the fields of automated inspection (AOI/AXI/SPI) and JTAG/Boundary Scan will be showcased by Goepel electronic at the 2016 SMT/Hybrid/Packaging exhibition in Nurmberg (April 26-28). VarioLine is a compact AOI system which includes a 4 camera angled-view module with 360° inspection and multispectral illumination. Optionally, it can be equipped with the measuring module 3D EyeZ.

Special model libraries for the TLE987x family of Infineon modules are now available for testing, validation and programming. GÖPEL electronic has made it possible to flexibly test and program those libraries identified as VarioTAP models using the SWD debug interface. This means that these Infineon modules can be used as instruments for prototype hardware design validation and production tests.

Functional circuit tests in real-time, high-performance bus simulation in vehicle networks and unrivaled test coverage from a single source are the highlights of GOEPEL electronic’s display at embedded world 2016 in Nuremberg (Feb 23-25). JEDOS, a recently introduced test platform is an embedded test & diagnostics operating system.  

The Spartan-6 FPGAs by Xilinx are protected against potential attackers and theft of IP (Intellectual Property) through the so called AES Programmer (Advanced Encryption Standard) from Goepel electronic. The Xilinx Spartan-6 AES Programmer by GOEPEL electronic is a tool integrated into the JTAG/Boundary Scan software platform SYSTEM CASCON. It allows programming of the so-called eFUSE register, including a 256bit AES key, via secure JTAG access.