The TPSM8286xA device family consists of 4-A and 6-A step-down converter power modules optimized for small solution size and high efficiency. The power modules integrate a synchronous step-down converter and an inductor to simplify design, reduce external components, and save PCB area. The lowprofile and compact solution is suitable for automated assembly by standard surface mount equipment.

SOUSB211DWEVM is an evaluaiton module used to evaluate the high-performance, 5000-VRMS reinforced isolated USB repeater in 28-pin SSOP (DP-29) package. The EVM features enough test points and jumper options to enable evaluation of the device with minimal external components.

The SimpleLink CC2652RSIP is a System-in-Package certified module, multiprotocol 2.4 GHz wireless microcontroller supporting Thread, Zigbee, Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects, proprietary systems, including the TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager driver.

The SimpleLink CC2652RSIP is a System-in-Package certified module, multiprotocol 2.4 GHz wireless microcontroller supporting Thread, Zigbee, Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects, proprietary systems, including the TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager driver.

The TLVM13630 synchronous buck power module is a highly integrated 36-V, 3-A DC/DC solution that combines power MOSFETs, a shielded inductor, and passives in an Enhanced HotRod™ QFN package. The module has pins for VIN and VOUT located at the corners of the package for optimized input and output capacitor layout placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

BQ79612-Q1, BQ79614-Q1 and BQ79616-Q1 provide high-accuracy cell voltage measurements in less than 200 μs for 12S, 14S and 16S battery modules in high-voltage battery management systems in HEV/EV. The family of monitors offers different channel options in the same package type, providing pin to-pin compatibility and supporting high reuse of the established software and hardware across any platform.

In our electric-vehicle future, semiconductor technology will offer grid operators more flexibility to better manage energy infrastructure  

Watch this Connect video where we discuss embedded machine learning with David Schwarz, solutions engineer from Edge Impulse. David also walks through a demo of Edge Impulse’s machine learning platform running on the SimpleLink CC1352P wireless MCU LaunchPad development kit.

The LM76002/LM76003 regulator is an easy-to-use synchronous step-down DC-DC converter capable of driving up to 2.5 A (LM76002) or 3.5 A (LM76003) of load current from an input up to 60 V. The LM76002/LM76003 provides exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed.

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3 V to 14 V while the maximal output voltage covers up to 18.5 V. 

The DRV871x-Q1 family of devices are highly integrated, multi-channel gate drivers intended for driving multiple motors or loads. The devices integrate either 4 (DRV8714-Q1) or 8 (DRV8718-Q1) halfbridge gate drivers, driver power supplies, current shunt amplifiers, and protection monitors reducing total system complexity, size, and cost.

As FPGAs are continually upgrading their performance, so too is the need for their power consumption. As a result, designers are requiring systems with increased power density that have a level of reliability needed for the harsh environment in space.

The LM7480x-Q1 ideal diode controller drives and controls external back to back N-Channel MOSFETs to emulate an ideal diode rectifier with power path ON/OFF control and overvoltage protection. The wide input supply of 3 V to 65 V allows protection and control of 12-V and 24-V automotive battery powered ECUs.

Texas Instruments (TI) will demonstrate at APEC (the Applied Power Electronics Conference) how engineers can overcome some of their most pressing power-management design challenges. From the 20th to the 24th of March 2022 in booth 514, the company will showcase the newest additions to its power management portfolio and demonstrate system-level solutions for increasing power density; reducing electromagnetic interference (EMI), noise and quie...

The TPS54360B is a 60-V, 3.5-A, step-down regulator with an integrated high side MOSFET. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no-load supply current to 146 µA. Shutdown supply current is reduced to 2 µA when the enable pin is pulled low.

The LM74700-Q1 is an automotive AEC Q100 qualified ideal diode controller which operates in conjunction with an external N-channel MOSFET as an ideal diode rectifier for low loss reverse polarity protection with a 20-mV forward voltage drop. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited ...

The LM74700-Q1 is an automotive AEC Q100 qualified ideal diode controller which operates in conjunction with an external N-channel MOSFET as an ideal diode rectifier for low loss reverse polarity protection with a 20-mV forward voltage drop. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited ...

Quiescent current, or IQ for short, is a critical power trend that impacts a growing number of battery-powered end equipments. IQ, or the amount of current when your IC is in a no-load or non-switching state, can come with tradeoff decisions. Luckily, power designers can rest assured that meeting current requirements can be accomplished while improving transient times or reducing overall form factor. 

Designing a power-efficient edge artificial intelligence (AI) system while achieving a faster time to market can become tedious in the absence of the right tools and software from an embedded processor vendor. Challenges include selecting the right deep learning model, training and optimizing the model for performance and accuracy goals, and learning proprietary tools for model deployment on the embedded edge processor.

The LP87524B/J/P-Q1 is designed to meet the power management requirements of the latest processors and platforms in various automotive power applications. The device contains four step-down DC-DC converter cores, which are configured as 4 single phase outputs. The device is controlled by an I2C-compatible serial interface and by enable signals.