The TPS22992x product family consists of two devices: TPS22992 and TPS22992S. Each device is a single-channel load switch with an 8.7-mΩ power MOSFET designed to maximize power density in applications up to 5.5 V and 6 A. A configurable rise time provides flexibility for power sequencing and minimizes inrush current for high capacitance loads.

Autonomous robots are intelligent machines that can understand and navigate through its environment without human control or intervention. Although this technology is relatively young, there are many different use cases of autonomous robots in factories, warehouses, cities, and homes. For example, robots can be used to transport goods around warehouses, like in Figure 1, or perform last-mile delivery, while other kinds of robots can vacuum homes ...

The TCAN1463-Q1 is a high speed Controller Area Network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high speed CAN specification and the CiA 601-4 Signal Improvement (SIC) specification. The device supports both classical CAN and CAN FD data rates up to 8 Megabits per second (Mbps).

The TCAN1462-Q1 and TCAN1462V-Q1 are high speed Controller Area Network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high speed CAN specification and the CiA 601-4 Signal Improvement (SIC) specification. The devices reduce signal ringing at dominant-torecessive edge and enable higher throughput in complex network topologies. Signal improvement capability allows the applications to extract real benefit of C...

A typical factory automation environment has multiple levels of operator and field control to establish device-to-device communication. As smart factories become more prevalent, it’s a challenge to design systems that not only address the complex computational needs of larger data sets throughout the factory, but to do so in a way that addresses multiprotocol real-time communication, as shown in Figure 1, with readiness for future system ma...

Demonstrating the building blocks of a typical home automation network over Thread using the upcoming Matter protocol for commissioning, device discovery and control. The demo will feature TI’s SimpleLink wireless MCU platform which supports Wi-Fi, Thread, Matter, Zigbee, Bluetooth LE, Wi-SUN and more.

Experience the benefits of using Wi-SUN mesh network for the wireless communication in EV chargers. This demo will showcase TI’s Wi-SUN FAN 1.0 mesh network software connecting several EV chargers to provide an overview of the bays, charging status,  power delivery and more. 

The TDA4VM processor family is based on the evolutionary Jacinto™ 7 architecture, targeted at ADAS and Autonomous Vehicle (AV) applications and built on extensive market knowledge accumulated over a decade of TI’s leadership in the ADAS processor market.

The SimpleLink CC1311R3 device is a multiprotocol Sub-1 GHz wireless microcontroller (MCU) supporting IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz). The CC1311R3 is based on an Arm Cortex M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical...

Wi-SUN is an open-standard protocol (IEEE 802.15.4g) driving unification in the market. Texas Instruments is an active Wi-SUN Alliance member, providing interoperable solutions, royalty-free software and standards-based multi-layer security. The Wi-SUN protocol is ideal for applications that require long RF transmission range, high node count, and robust network performance with self-healing mesh such as connected smart meters, EV charging, and s...

The LM7480x-Q1 ideal diode controller drives and controls external back to back N-Channel MOSFETs to emulate an ideal diode rectifier with power path ON/OFF control and overvoltage protection. The wide input supply of 3 V to 65 V allows protection and control of 12-V and 24-V automotive battery powered ECUs.

This application note describes the hardware setup and software configuration to perform Direct Test Mode (DTM) using Bluetooth test equipment with TI's SimpleLink Bluetooth Low Energy MCUs.

In this podcast, Electronic Specifier's Charlotte Morgan interviews Ryan Manack, Director, Worldwide Marketing at Texas Instruments (TI) about TI's work in the automotive industry, ADAS (advanced driver assistance systems), and more.

Automotive GaN FET with integrated gate driver, protection, reporting and active power management, LMG3522R030-Q1, features a top cooled surface mount package to simplify production and heat dissipation. The C2000 MCU ensures smooth monotonic start-up of power factor correction (PFC) output. Together, the GaN FET and C2000 MCU can enable an industry-highest 500kHz resonant frequency and 59% smaller magnetics in a 6.6-kW on-board charger.

UCC14240-Q1 is a high isolation voltage DC/DC module designed to provide power to IGBT or SiC gate drivers. The high-accuracy output voltages provide better channel enhancement for higher system efficiency without over-stressing the power device gate. The module integrates a transformer and DC/DC controller with a proprietary architecture to achieve high efficiency with very low emissions.

Creating faster, smarter and more accurate systems requires more data from more sensors, along with increasing amounts of processing power.

Performance, efficiency, flexibility and protection – these are the attributes paramount to power electronics technologies, such as motor control, digital power, renewable energies, lighting, and electrical vehicles.

The HDC302x-Q1 is an integrated capacitive based relative humidity (RH) and temperature sensor. It provides high accuracy measurements over a wide supply range (1.62 V – 5.5 V), along with ultra-low power consumption in a compact 2.5-mm × 2.5-mm package.

In this video, you will learn about how Imagimob’s content pack makes gesture detection easy to use and program on TI mmWave sensors. You will be introduced to the model building process on Imagimob’s software platform as well as see how multiple gestures can be trained.

In this episode of Process This, we are joined by PHYTEC, an industry-leading provider and integrator of System on Modules (SOMs) that enable companies to bring complex products quickly and easily to market.