The TPS7A78 improves the overall efficiency and standby-power in power-supplies in an easy-to-use, non-magnetic approach to AC/DC conversion. The TPS7A78 uses a capacitor-drop architecture to lower the AC source voltage before actively clamping the rectified voltage. The device then regulates this rectified voltage down to the application-specific operating voltage. The unique architecture of the device allows the standby power to be reduced to j...

The TPS6287x-Q1 is a family of pin-to-pin 6-A, 9- A, 12-A, and 15-A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I2C interface and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15-A continuous output current at high ambient temperatures.

The TPSM8282x device family consists of a 1-A, 2- A, and 3-A step-down converter MicroSiP power modules optimized for small solution size and high efficiency.

The TPSM5D1806 dual 6-A output power module is a highly integrated and flexible DC-DC power supply packaged in a compact 8-mm × 5.5-mm × 1.8-mm, QFN package. The input voltage range of 4.5 V to 15 V allows conversion from a wide intermediate bus as well as standard 5-V and 12-V rails. The two 6-A outputs can be configured independently for two separate power rails or combined for a single 2-phase, 12-A output.  

The TPS61288 is a high-power density, fully integrated synchronous boost converter with a 6.5- mΩ power switch and a 8.5-mΩ rectifier switch to provide a high efficiency and small size solution in portable systems. The TPS61288 has a wide input voltage range from 2 V (2.4 V rising) to 18 V to support applications with single-cell or two-cell Lithium batteries. The device has 15-A switch current capability and is capable of providing a...

Texas Instruments (TI) has reported Q2 revenue of $5.2 billion, an increase of 6% sequentially and 14% year-over-year, driven by growth across markets.

In the article, 'LDO basics: power supply rejection ratio', Aaron Paxton discussed using a low-dropout regulator (LDO) to filter ripple voltage arising from switched-mode power supplies.

In the past, a human machine interface (HMI) consisted of a physical control panel with push buttons, switches and indicator lights that enabled users to communicate with a machine. As the technology progressed, it became possible for users to monitor processes, see status information displays and send commands. Now, HMI applications are everywhere, including smartphone apps used to control televisions, voice commands in a vehicle, patient monito...

At embedded world 2022, on the Digi-Kkey booth, Paige West speaks with Brian Berner, Platform Marketing – Embedded Processors at Texas Instruments and True Loan, Application Engineer, PHYTEC America about building a smart EV charging station.

This document provides the SK-TDA4VM capabilities and interface details. Bring smart cameras, robots and intelligent machines to life with the TDA4VM processor starter kit.

The MMWAVEICBOOST Board is combined with the compatible antenna modules from the starter kit for Industrial Radar Devices of the xWR68xx family.

Texas Instruments (TI) (NASDAQ: TXN) expanded its connectivity portfolio with a family of wireless microcontrollers (MCU) that enable high-quality Bluetooth Low Energy (LE) at half the price of competing devices. 

Jacinto TDA4x SoCs family provides highly integrated, high-performance processors with power efficient architecture to enable optimized Advanced Driver Assistance Systems (ADAS) solutions. Based on the performance, safety, power and application requirements, there are some scenarios where dual-TDA4x solution might be required to meet system goals. This application re;port introduces the motivation and high-level systems considerations for dual-So...

This video is a concise introduction into the C2000 ecosystem. In 5 minutes, learn about the essentials of C2000™ devices and why C2000 is a leader in real-time control. C2000 offers extensive hardware and software solutions which greatly facilitate the process of integrating C2000™ into control systems.

Increase your robot’s performance and speed without compromising the time of response to a safety threat with TI mmWave radar technology.

The high voltages present in factory automation, motordrives, grid infrastructure and electric vehicles (EVs) canbe several hundred or even thousands of volts. Galvanicisolation helps resolve the challenge of designing a safehuman interface in the presence of such high voltages. 

Peek inside a real blood pressure monitor to understand how the system works and how Bluetooth Low Energy is used in this application.

The new Sitara AM62 processors from Texas Instruments (TI) help expand edge artificial intelligence (AI) processing into next-generation applications.

The high voltages present in factory automation,motor drives, grid infrastructure and electric vehicles(EVs) can be several hundred or even thousands ofvolts – good for efficiency, but potentially harmful forlow-voltage circuits and humans.