EMCO Announce Proportional No Load Variation Application Note

29th January 2013

ES Admin

0 0

Whitepaper

EMCO have recently released this new Application Note focusing on proportional converters. EMCO High Voltage offers two types of converters: regulated and proportional. The output voltage for proportional converters is proportional to the input voltage range from about 15% to 100%.

This Application Note describes operation of EMCO proportional converters with varying load conditions and applies to these EMCO products:

•A Series
•F Series
•GP Series
•DX Series
•FS Series
•L Series
•E Series
•G Series
•Q Series

Safety Warning

High voltage power supplies present a serious risk of personal injury if not used in accordance with design and/or use specifications, if used in applications on products for which they are not intended or designed, or if they are used by untrained or unqualified personnel.

For more information, please refer to the EMCO Safety Warning and Disclaimer located at: http://www.emcohighvoltage.com/pdfs/Safety-Warning-Concern-HV-3460B.pdf.

General Information

•EMCO proportional models are typically isolated.
•Proportional models are typically smaller than regulated units.
•The output voltage is proportional to the input voltage – from 15-100% Vin.
•The output voltage is load dependent – they are not load regulated.
•The Full Load vs. No Load variation depends on the selected EMCO converter.

See the link below to download the full application note.