Companies

EMCO High Voltage Corp

EMCO High Voltage Corp Articles

Displaying 1 - 20 of 21
Power
6th August 2015
Minimising the impact of source resistance on high-voltage DC/DC converters

Resistance between a low-voltage power supply and the input terminals of a DC/DC converter results in not only power-loss but reduced long-term reliability in the converter. The impact of source resistance to a converter is measured using EMCO A-series models. Design guidelines are given to minimise reliability impact due to source resistance.

Power
23rd September 2014
Power supplies consume less than 4mA at full output

Designed for mobile, battery-powered detector applications, the P series micro-power high voltage power supplies have been introduced by EMCO High Voltage. Offering fully regulated and programmable outputs of 0-1200 or 0-2000V, the power supplies consume less than 4mA at full output.

Power
26th November 2013
Low output ripple makes DC power supplies ideal for sensistive equipment

The CB Series of miniature, regulated DC to high voltage DC power supplies has today been announced by EMCO. With the CB Series offering an output of 0 to 10kV at 1 watt, the introduction of this series signals an expansion of EMCO’s miniature, regulated 1W offering to 10kV.  

Power
29th January 2013
EMCO Reveal Reverse Polarity Protection Application Note

EMCO have recently released this new Application Note focusing on the protection of a power supply. This Application Note describes how to protect an EMCO high voltage supply from a negative input voltage. A negative input voltage may cause damage to the unit.

Power
29th January 2013
EMCO Release How to Connect and Test a Regulated Model Application Note

EMCO have recently released this new Application Note focusing on the connection and testing of regulated modules. This Application Note describes how to connect and test a regulated unit and applies to the EMCO C Series, CA Series and H Series.

Power
29th January 2013
EMCO Announce Proportional No Load Variation Application Note

EMCO have recently released this new Application Note focusing on proportional converters. EMCO High Voltage offers two types of converters: regulated and proportional. The output voltage for proportional converters is proportional to the input voltage range from about 15% to 100%.

Power
29th January 2013
EMCO Reveal How To Connect And Test A Proportional Model Application Note

EMCO have recently released this new Application Note focusing on the connection and testing of proportional modules. This Application Note details how to connect and test an EMCO proportional model to verify operation. This Application Note applies to these EMCO products:

Power
29th January 2013
EMCO Release Connecting Proportional Models For Positive Or Negative Outputs Application Note

EMCO have recently released this new Application Note focusing on the connection of proportional modules. This Application Note describes how to connect proportional models for either positive or negative output as applicable to these floating and isolated EMCO models:

Passives
29th January 2013
EMCO Announce Input Bypass Capacitor Application Note

EMCO have recently released this new Application Note focusing on the use of an input bypass capacitor. This Application Note applies to all EMCO Product Series and describes the optional use of an input bypass capacitor for improved performance.

Power
16th January 2013
Next-Generation, Miniature High Voltage Power Modules From EMCO

The first generation of high voltage power modules changed the way designers could use high voltage, and the next-generation is pushing the envelope further. EMCO next-generation, miniature high voltage power modules provide designers and end-users ever-expanding choices for off-the-shelf, drop-in miniature solutions to meet their high voltage needs.

Tech Videos
16th November 2012
High Voltage Power Supplies from EMCO

Miniature, High Performance, High Voltage Power Supplies in Stock.

Power
9th November 2012
EMCO High Voltage Corporation Receives UL Listing for C and CA Series

EMCO High Voltage announced today that its C and CA Series of regulated high voltage DC to DC converters received Underwriters Laboratories Mark. One of the most recognized symbols of safety in the world, the UL Mark indicates that UL has thoroughly tested and evaluated the product to determine that it meets their exacting safety standards and has certified two EMCO manufacturing facilities for production of these units.

Power
9th November 2012
EMCO High Voltage Corporation Introduces Low Profile, Surface Mount High Voltage Power Supply

EMCO High Voltage today announced the latest development in its line of ultra-miniature high voltage converters. The AG Series utilizes a novel surface mount design that recesses the power supply into a trench in the host PWB, resulting in a component height profile one eighth of an inch (0.128 in, 7.11mm).

Power
2nd February 2011
EMCO High Voltage Establishes a New Standard in High Voltage Miniaturization

The A Series is a new line of ultra-miniature, DC to HV DC converters that set a new industry standard in high voltage miniaturization with a unique package occupying less than one tenth of a cubic inch of volume, and an extremely low profile of only 0.250 inches (6.35mm)! Controllable output voltages range from 100 volts to 6000 volts. These component-sized converters are ideal for applications requiring minimal size and weight.

Power
2nd March 2010
EMCO Advances Performance and Reliability of DC to High Voltage DC Converters with New Smart Features.

The new FS Series of miniature DC to High Voltage DC converters from EMCO High Voltage Corporation, Sutter Creek, CA, sets a new standard of performance and reliability. FS Series design performance is greatly improved by leveraging EMCO's proven high voltage power conversion technology and adding new “Smart Features” to enhance long-term reliability and survivability in harsh, mission-critical applications.

Power
10th December 2009
Ultra-Low Power Consumption High Voltage Power Supplies

The Ultra Low Power (ULP) Series DC-DC converters are an expansion of EMCO’s commitment to industry-leading innovation and delivers orders of magnitude reduction in power consumption over existing solutions.

Power
27th October 2009
Emco - Ultra-low Power Consumption High Voltage Power Supplies

The Ultra Low Power (ULP) Series DC-DC converters are designed for the demands of portable, battery-powered applications The ULP Series provides output voltages from 0 to 500 VDC through 5000 VDC, while consuming less than two (2) milli-watts of power. This translates to 4500 hours of operation on just two AA lithium batteries.

Power
8th October 2009
EMCO - Ultra Low Power DC-DC converters

As a result of EMCO High Voltage Corporation’s continuing commitment to industry-leading innovation the company has introduced an Ultra Low Power (ULP) Series DC-DC converters.

Power
4th November 2008
EMCO Puts Ultra-Miniature HV Converters on Fast Track

EMCO High Voltage has announced it has reduced the manufacturing lead time on its Ultra-Miniature Q Series to just one week. A conversion to Lean Manufacturing enabled the rapid response and enables value pricing. EMCO also provides an inventory of finished product at its headquarters in California and at its stocking distributor in Europe, Condatas AG.

Power
8th October 2008
High Voltage Power Supply stocking program for Europe

EMCO High Voltage Corp and Condatas AG, have launched a new stocking inventory program to provide the European community with shorter lead times and reduced cost of ownership. Condatas AG, based in Switzerland, will stock an assortment of EMCO’s popular off-the-shelf power supplies, providing rapid and efficient delivery to customers. This is especially beneficial to designers developing new products, as various models can be in their hands i...

First Previous Page 1 of 2 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier