Power
EMCO Release How to Connect and Test a Regulated Model Application Note
EMCO have recently released this new Application Note focusing on the connection and testing of regulated modules. This Application Note describes how to connect and test a regulated unit and applies to the EMCO C Series, CA Series and H Series.
SHigh voltage power supplies present a serious risk of personal injury if not used in accordance with design and/or use specifications, if used in applications on products for which they are not intended or designed, or if they are used by untrained or unqualified personnel.
For more information, please refer to the EMCO Safety Warning and Disclaimer located at: http://www.emcohighvoltage.com/pdfs/Safety-Warning-Concern-HV-3460B.pdf.
General Information
•EMCO regulated models are not isolated and have a common input and output ground connection.
•The output voltage is tightly controlled in regulated units, regardless of the load condition.
•How tightly the output voltage is controlled depends on the regulation specification of the selected EMCO unit.
See the link below to download the full application note.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
Upcoming Events
19th November 2024
Germany MESSE BREMEN Halls 4, 5, 6 & 7 Findorffstrasse 101 28215 Bremen
