Murata has developed world's thinnest Electric Double-Layer Capacitors

Murata will exhibit the DMF series in booth (8Hall 8F87) at CEATEC JAPAN 2012, which will be held at Makuhari Messe, Chiba Prefecture, between October 2 and 6, 2012.

Electric double-layer capacitors are capable of storing energy with physical adsorption of the ion on the surface of active carbon without using chemical reactions, which makes them devices that are not only able to semi-permanently repeat electrical charging and discharging in comparison with normal rechargeable batteries, but also able to be charged and discharged rapidly. They also do not use lead or any other toxic substances, and because of this they are attracting much attention as storage devices that conform to the Restriction of Hazardous Substances Directive (RoHS) covering electric and electronic equipment established by the European Union, etc., thereby placing minimal burden on the environment.

Murata acquired this technology from Australia's CAP-XX Ltd. ; the business partnership established in 2008 has resulted in Murata manufacturing the DME series of electric double-layer capacitors since December 2010.

The DMF series features an optimized internal configuration to realize a design approximately 30% more compact than the DME series, making the DMF it the thinnest of its type in the world. The DMF also features the highest levels of power density in the industry and the same low resistance of a few dozen milliohms and stable temperature characteristics as the DME series, enabling it to be charged and discharged flexibly through high-output and low-output areas in a wide variety of temperature ranges. The capacitors can be used as the power supplies for camera flashlights utilizing high-intensity LEDs, and will contribute to improving the brightness of LED flashlights on not only digital cameras, but also on smartphones.

Features
1.The ESR (Equivalent Series Resistance) is low, 40m ohms to 90m ohms, which enables high-current and high-output charging and discharging.
2.Operating temperature range of -30°C to +70°C.
3.30% smaller than the DME series and the world's thinnest.

Applications
1.Auxiliary power source for LED flash units used in digital cameras, digital video cameras and cell phones.
2.Peak output assistance to reduce battery load variations.
(Restrains load variations in high-output communication (GSM) and audio output batteries. )
3.Peak output assistance when operating compact smart meter motors.
4.Peak output assistance for USB bus power*.
5.Combining the DMF capacitors with various power devices provides a life-cycle of 100,000 cycles or more and enables it to be used as a maintenance-free power storage element.

Terminology

* USB bus power: A system in which power is supplied from a computer to peripheral equipment with the use of a USB cable.
##IMAGE_2_C##
##IMAGE_3_C##
##IMAGE_4_C##
Production

Mass production to commence at the Fukui Murata Manufacturing Co., Ltd. from October 2012 (400,000 units/month. )

Sample Price

300 yen/piece