Tiny Qseven Starter Kits with ready-to-run Linux Installation

The kits are based on the new 3.5-inch platform board Q7-MB-EP1 and offer a variety of useful interfaces. Along with the kit, the user can select a suitable Qseven module from the MSC portfolio. Additionally, the kit features a Qseven Heatspreader, a ready-to-run Linux installation on USB Flash Stick and a suitable 12V power supply. Optionally, the evaluation kit is available with a TFT panel including a suitable cable kit.

The starter kit does not yet contain a Qseven module. Instead, the user is encouraged to order his Qseven module of choice so that the kit always uses the module with the most suitable processor speed and feature set from the MSC range of Qseven modules with Intel Atom processor:
- Z530 with 1.6GHz, 1GB DRAM, 3x PCIe x1, 2x SATA-300, 8x USB, Gbit LAN
- Z510 with 1,1GHz, 1GB DRAM, 3x PCIe x1, 2x SATA-300, 8x USB, Gbit LAN
- Z510 with 1,1GHz, 512MB DRAM, 1x PCIe x1, 8x USB, Gbit LAN
- Z530 with 1,6GHz, 1GB DRAM, 4GB Flash Disk, 1x PCIe x1, 1x SATA-150, 8x USB, Gbit LAN
- Z510 with 1,1GHz, 1GB DRAM, 4GB Flash Disk, 1x PCIe x1, 1x SATA-150, 8x USB, Gbit LAN

The new Embedded Platform board Q7-MB-EP1 combines the most important interfaces for embedded applications on a compact 3.5“ printed circuit board (pcb) with the following features: Qseven module socket, Mini-PCI-Express socket, MMC/SD Card socket, VGA/CRT and LVDS interfaces, 2 SATA interfaces and 4x USB connectors, on-board 4/5-wire touch controller for resistive touch panels, 6-channel HD audio codec, serial interface and 10V…28V power converter. Thus the Qseven carrier board is suitable for a wide range of embedded applications from industrial controls to information kiosks and POS systems, to name just a few.

For the Qseven Starter Kit the chosen module will be mounted on the EP1 baseboard and covered with the Qseven Heatspreader which acts as a heat sink and effects a steady distribution of the resulting heat. In addition, an aluminium rail called Heatrail leads heat from the underside of the module down to the metallisation of the carrier board’s pcb. For small housing with little air circulation, an optional heatsink may be mounted on the heatspreader.

For operation without LCD, a CRT/VGA output connector is available on the baseboard. Alternatively, an LVDS TFT panel may be connected using the JILI30 interface of the carrier board. A starter kit with an optional TFT is also available, and in addition MSC can offer a selection of further LCD panels from its wide product portfolio encompassing very many renowned LCD manufacturers. A 12V power supply with suitable cables is enclosed in the delivery so that the starter kit may be powered up immediately after unwrapping.

To further alleviate the integration of Qseven modules, a 4GB USB Flash stick is included which contains a ready-to-run, bootable Ubuntu 9.10 Linux installation. Manuals, drivers and additional tools can be found on the included Resource-CD. Last but not least, the carrier case of the starter kit contains a comprehensive „Getting-Started“ manual which helps with a fast start-up of the kit.