C02 laser marker adapted to remove component markings
Companies often want the markings on components removed to make it hard for rivals to easily find out what parts are used on the PCB. Similarly, military and security products without product part codes make them hard to reverse engineer or hack. This is usually done after PCB assembly to ensure that the board is made correctly, but the technique of manually grinding the markings off afterwards is time consuming and can often damage components and stress solder joints.
Escatec offers a solution to this problem, using its existing CO2 laser marker that was installed to change the surface structure of the solder resist to give a clear and permanent marking on the surface of PCBs. The marking can be for machine-readable codes as well as text, graphics and logos, which show up as white areas on the PCB.
“We found that using the laser to burn on a ‘sea of numbers’ pattern on the tops of the components made sure that none of the markings can be read,” explained Martin Muendlein, Engineering Manager, Escatec. “There is no damage or stress and the laser is very fast and accurate to within ±0.1mm. Most importantly, it is fully automatic so that we cut out a huge amount of time that was previously spent grinding the markings off and therefore reduce production costs for the customer.”
An example PCB component before and after Escatec laser etching
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
