Home > Resource Centre > Texas Instruments > Logic > Little Logic > TXB0102DCUTG4

Logic

TXB0102DCUTG4

Texas Instruments

Price range: $0.38 - $1.03

Category: Logic

Voltage Level Translator 8-Pin VSSOP T/R

Products Folder Datasheet

TXB0102DCUTG4 Inventory

by: Texas Instruments

Distributor

SKU

Stock

Cost

Newark

TXB0102DCUTG4

$0.59

Buy

AVNET Express

TXB0102DCUTG4

1250

$0.38

Buy

Texas Instruments

TXB0102DCUTG4

110152

$1.03

Buy

Parameters

Operating Temperature Range(C)

-40 to 85

Rating

Catalog

Approx. Price (US$)

0.29 | 1ku

Schmitt Trigger

Package Group

DSBGA,VSSOP

Bits(#)

Input Type

CMOS/TTL

Package Size(mm2=WxL)

8VSSOP

Output Type

CMOS

VCC(Max)(V)

5.5

3-State Output

VCC(Min)(V)

1.2

Sub-Family

Dual Supply Translator

Voltage(Nom)(V)

3.3

Logic

True

ICC @ Nom Voltage(Max)(mA)

0.005

tpd @ Nom Voltage(Max)(ns)

4.9

Features

Part Family

TXB0102

Status

ACTIVE

ROHS

TBD

PB Free

Products to complete your design

RF430FRL152H

The RF430FRL15xH device is a 13.56-MHz transponder chip with a programmable 16-bit MSP430 low-power microcontroller. The device features embedded universal FRAM nonvolatile memory for storage of program code or user data such as calibration and measurement data. The RF430FRL15xH supports communication, parameter setting, and configuration through the ISO/IEC 15693, ISO/IEC 18000-3 compliant RFID interface and the SPI or I²C interface. Sensor measurements are supported by the internal temperature sensor and the onboard 14-bit sigma-delta analog-to-digital converter (ADC), and digital sensors can be connected through SPI or I²C.

The RF430FRL15xH device is optimized for operation in fully passive (battery-less) or single-cell battery-powered (semi-active) mode to achieve extended battery life in portable and wireless sensing applications. FRAM is a nonvolatile memory that combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash, all at lower total power consumption.

Features:

ISO/IEC 15693, ISO/IEC 18000-3 (Mode 1) Compliant RF Interface
Power Supply System With Either Battery or 13.56-MHz H-Field Supply
14-Bit Sigma-Delta Analog-to-Digital Converter (ADC)
Internal Temperature Sensor
Resistive Sensor Bias Interface
CRC16 CCITT Generator
MSP430 Mixed-Signal Microcontroller
- 2KB of FRAM
- 4KB of SRAM
- 8KB of ROM
- Supply Voltage Range: 1.45 V to 1.65 V
- Low Power Consumption
  - Active Mode (AM): 140 µA/MHz (1.5 V)
  - Standby Mode (LPM3): 16 µA
- 16-Bit RISC Architecture
- Up to 2-MHz CPU System Clock
- Compact Clock System
  - 4-MHz High-Frequency Clock
  - 256-kHz Internal Low-Frequency Clock Source
  - External Clock Input
- 16-Bit Timer_A With Three Capture/Compare Registers
- LV Port Logic
  - V_OL Lower Than 0.15 V at 400 µA
  - V_OH Higher Than (V_DDB – 0.15 V) at 400 µA
  - Timer_A PWM Signal Available on All Ports
- eUSCI_B Module Supports 3-Wire and 4-Wire SPI and I²C
- 32-Bit Watchdog Timer (WDT_A)
- ROM Development Mode (Map ROM Addresses to SRAM to Enable Firmware Development)
- Full 4-Wire JTAG Debug Interface
For Complete Module Descriptions, See the RF430FRL15xH Family Technical Reference Manual (SLAU506)
For Application Operation and Programming, See the RF430FRL15xH Firmware User's Guide (SLAU603)