Power

SEMIKRON introduces versatile inverter platform for applications from 150 kVA to 3MVA

16th June 2010
ES Admin
0
The SEMIKRON Solution Centre network has introduced SKiiPRACK, a high power converter/inverter platform for industrial applications, including AC/DC drives, wind power, industrial power supplies and power conversion applications with power ratings ranging from 150 kVA to 3.0 MVA. With a power density of more than 12 kVA/litre, SKiiPRACK boasts a design that is typically 25 percent smaller than competitor products. A single 3.0 MVA three-phase inverter or 1.5 MVA three-phase four-quadrant converter can be installed in a standard 600 mm x 600 mm x 2000 mm cabinet. Larger configurations, such as a 3.0 MVA four-quadrant converter, can be realised by mounting SKiiPRACKs side by side in a larger cabinet.
The modular SKiiPRACK phase block assembly is available in different versions, which are connected together to configure a complete converter/inverter to the customer’s requirement. Each phase assembly comprises a water-cooled cooling plate, one or two SKiiP IGBT intelligent power modules, snubbers, a capacitor bank and a low-inductance DC bus bar housed in a rigid mechanical frame with a sliding mechanism for ease of servicing or field replacement.

The SKiiPRACK platform undergoes a rigorous qualification process. One example of the range of arduous type tests applied to the SKiiPRACK is 100 thermal cycles of ten hours duration each in accordance with IEC60068-2-14. Other tests including environmental, shock and vibration, additional to the normal electrical and isolation tests, ensure the overall ruggedness of the SKiiPRACK.

A variety of phase assembly configurations are available. For example an assembly can contain four SKiiP1213GB123 to realise a complete three phase inverter + brake chopper at 450kVA. Alternatively, at the high end of the power scale, one phase assembly can contain two x SKiiP2403GB172 connected in parallel to form one phase of a 3. 0MVA inverter, with three of these phase assemblies mounted in one cabinet forming a complete three phase converter/inverter. Low inductance DC busbars link the phase assemblies together and the AC connections can either be made at the front of each phase assembly or at the bottom rear of the complete assembly, facilitated via interconnecting AC busbars.

A choice of either electrolytic capacitors, or polypropylene capacitors for long lifetime, is available. The SKiiPRACK is available as individual phase assemblies that can be mounted into a cabinet, or already mounted into a standard electrical cabinet.

SKiiPRACK capitalises on the low-inductance and power density of SKiiP, which is 20 percent higher than competitor products. Each SKiiP IPM is fully tested during its own production process. Every SKiiPRACK undergoes a full suite of tests during production including isolation, operational load tests and short circuit tests. Additionally an optional burn-in is available for customers who require an elevated level of severity. This ensures maximum robustness and reliability during the long service lifetimes necessary for high-value high-power applications.

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier