Samtec releases Analog over Array reference designs
Samtec, the service provider for the connector industry, has enhanced its open-pin-field arrays to simultaneously run analog, digital, and power signals.
New reference designs allow Samtec’s proven high-performance connector arrays, such as the SEARAY, to support analog signals.
Intended for use in high-density RF applications, the new Analog over Array reference designs allow dense, open-pin-field connectors to support digital and analog differential or single-ended signalling, as well as power. These high-density array connectors are already proven in high-speed, high-performance digital and power applications; now, their differential ground pattern can be used to support RF SOCs and applications such as 5G wireless, remote PHY/MSOs, phased array radar, test and measurement, and LEO/MEO satellites.
Performance is specified at:
- 8GHz bandwidth
- 50ohm system impedance for single-ended; 100ohm for differential
- Return loss of -12dB up to 4GHz; -10dB up to 8GHz
- Crosstalk isolation between channels: -69dBc to 4GHz, -63dBc to 8GHz
The reference design includes recommended pin mapping as part of a full characterisation report. Additional reference designs are in development for applications out to 40GHz.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
