Analysis
Compression Load Cells will measure up to 100 tonnes using strain gauge technology
The SCL Compression Loadcell, now available from Celsum Technologies Ltd, can be supplied with full scale ranges between 1 tonne and 100 tonnes, or 10kN and 1,000kN (or 1MN). Fabricated from stainless steel, these precision force transducers are sealed to IP67 to the BS60529 standard, and use a 700 ohm strain gauge bridge with a sensitivity of 1.5mV/V. Designed with long term resistance to fatigue, the SCL loadcells have a high cycle life, a safe overload capacity of 150% of full scale, and an ultimate overload limit of 300% of full scale.
The Says Celsum's Roy Carter, The SCL load cell is a welcome addition to the range that we offer, with applications from materials testing through to weighing, and from on-line process control to R & D and quality control. As well as this an other load cells, we offer a wide range of instrumentation, too, from simple analogue amplifiers to digital electronics with computer interfaces and precision digital displays and controllers, to state-of-the-art wireless telemetry.