Companies

Celsum Technologies Ltd

  • Willow House 17 Braemar Close Mountsorrel Leics
    LE12 7ES
    United Kingdom
  • 0116 210 6319
  • http://www.celsum.com
  • 0870 120 9370

Celsum Technologies Ltd Articles

Displaying 1 - 14 of 14
Communications
20th October 2010
Mini Amplifiers take the strain out of gauging!

The ICA In-Cell range of analogue strain gauge amplifiers is designed to fit close to the strain gauge in a load cell or similar sensor in order to provide a reliable, low-noise, cost-effective signal conditioning solution. The ICA range is also an ideal cost-efficient solution in many other OEM, R and D, troubleshooting and process instrumentation applications.

Communications
20th May 2010
ATEX Approved Current Loop Strain Gauge Amp

Celsum Technologies can now offer the ALA5 ATEX-Approved, 2-wire, 4-20mA Current Loop In-Line Strain Gauge Amplifier, which may be used for connecting sensors such as load cells, force transducers, accelerometers, torque transducers and pressure sensors in hazardous areas where there is risk of an explosion. The unit is certified for ATEX Hazardous Zones 0, 1 and 2, and is Instrinsically Safe to EN60079-11.

Analysis
22nd April 2010
Compression Load Cells will measure up to 100 tonnes using strain gauge technology

The SCL Compression Loadcell, now available from Celsum Technologies Ltd, can be supplied with full scale ranges between 1 tonne and 100 tonnes, or 10kN and 1,000kN (or 1MN). Fabricated from stainless steel, these precision force transducers are sealed to IP67 to the BS60529 standard, and use a 700 ohm strain gauge bridge with a sensitivity of 1.5mV/V. Designed with long term resistance to fatigue, the SCL loadcells have a high cycle life, a safe...

Communications
21st November 2009
New 6-digit display allows data display from RS232 and RS485 serial interfaces

The new SerialDis display , available from Celsum Technologies, is a packaged in a rugged ABS housing sealed to IP65, and is ideal for when a data display driven by an RS232 or RS485 interface in required. SerialDis has six bright, red, 7-segment LEDs, nominally 20mm high, that can be programmed to display data. from a PC or directly from a suitably configured device. Celsum offers several such devices, such as the radio telelmetry T24-SO serial ...

Communications
18th September 2009
DIN Rail Temperature Controller

The EV6421M from Celsum Technologies is a versatile, general purpose, DIN-Rail or (surface) mounting, well-priced temperature controller. It allows a wide range of input signals, has a built-in display, has an on/off control action, and has two programmable alarms. It is available in 115V and 230V mains supply versions, and has an alarm buzzer that can be programmed to activate or not in an alarm condition.

Communications
14th September 2009
4-20mA Current Loop Accelerometer

Celsum Technologies Ltd has introduced single-axis, current-loop accelerometers to its range of cost-efficient, strain-gauge based accelerometers.The CTA103A-420 accelerometers are available with ranges of ±2g through to ±200g, Weighing less than 30g, the CTA103A-420 is packaged in a rugged, aluminium, IP-65 sealed housing, and is available with an integral screened cable or with a miniature multi-pole socket connector.

Communications
17th May 2009
USB high-accuracy digital signal conditioning amplifier for strain gauge devices

The DSCUSB, a compact, high performance, strain gauge digital signal conditioner with USB connectivity aimed at many applications, providing high-accuracy measurement repeatability, is now available from Celsum Technologies. A rugged metal enclosure makes the device suitable for many environments. Simply by plugging the device into a PC, data can be read in engineering units from most strain gauge bridge sensors such as load cells, accelerometers...

Test & Measurement
13th June 2008
Digital Thermometer Hits Target for Fresh Cement and Concrete Temperature

The CT2040 Digital Thermometer and probe meets the requirements of ASTM C1064 for measuring the temperature of fresh hydraulic-cement concrete. It is also useful for many other application.

Test & Measurement
13th June 2008
Radio Telemetry for Strain Gauge Devices from Celsum

The T24-SA is a high performance strain gauge to radio telemetry converter module, offering precision measurement with high performance two-way telemetry. Usable around the globe on licence-free 2.4 GHz frequency, the T24 range avoids local radio interference to ensure data integrity and security. For use in any measuring applications, from torque to weight, vibration to flow, the T24 offers users a complete solution to your measurement requireme...

Pending
29th May 2008
Humidity Generator and Controller from Celsum Technologies

Newly available from Celsum Technologies is the HGC Humidity Generator and Controller, a flexible solution for providing an accurate relative humidity environment for many applications, such as conditioning samples for laboratory and QA testing, and for electronic components assessment. The HGC can control the humidity of a chamber of up to nominally 2,000 ml volume to a relative humidity of 85% at temperatures between 5°C and 85°C.

Analysis
2nd May 2008
Celsum's Inline Housing Lets Loadcells Communicate

Celsum Technologies has added the new ILE Inline Converter Housing to its range of products related to strain gauge based sensors.

Enclosures
4th April 2008
Low Voltage Version of Panel-Mount Datalogger / Recorder Now Available

A low-voltage version of the PR100A two-channel (expandable to six channel) panel-mounting datalogger and recorder is now available from Celsum Technologies Ltd.

Analysis
25th March 2008
Strain Gauge Amp accepts wider supply voltage

The ICA6 InCell analogue strain gauge conditioning amplifier is the latest edition to the InCell amplifier range, available from Celsum Technologies. With strain gauges with resistances of greater than 1 kilohm, the ICA6 can be powered by a unipolar 14 - 24V DC supply, although, with 350 ohm strain gauge bridges, supply voltages of 14 - 18V DC may be used.

Passives
19th March 2008
Lightning Protection for Load Cell Installations

Celsum Technologies Ltd have recently added to their range of strain gauge based sensors and instrumentation the IPU40 Lightning Protection System. The IPU40 is especially useful for applications with external load cells, such as vehicle weighing, web tensioning, crane loading, canitlever overload protection, lift assemblies, generic load movers, and many others.

First Previous Page 1 of 1 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier