For ultimate data centre security, technology alone is not the answer

Less often discussed but just as important as the security of our data, is the security of the data centres that house it. And at first glance, identifying, reviewing and prioritising all the elements that a data centre must contain in terms of security would appear to be a very complex subject, depending on myriad variables including facility size, organisation type, service commitments, system complexity and customer requirements.

However, independent of the variables mentioned above, in my view data centre security can be boiled down to just two areas: physical security and operational security. While both of these clearly depend to a great extent on technology, the single most important element is the establishment of appropriate policies, processes and operating procedures – and critically, of course, actually following them.

Unfortunately, over the years I have seen many examples of security – both physical and operational – being seriously compromised through the lack of clear and well-defined security processes and procedures. And ironically, I have seen this most often in data centre facilities that had state-of-the art security equipment installed.

For example, implementing the latest and most sophisticated biometric access systems does not, by itself, ensure that supposedly secure areas are actually secure and that access is fully controlled. On the contrary, I have witnessed unauthorised and unsupervised personnel wander in and out of secure areas at will. The failure here not being due to any fault with the access control equipment itself but to appropriate security protocols not being implemented or maintained.

As for operational security, a standard requirement for any modern data centre is to have redundancy capabilities fully integrated in order to ensure continuous operation even if disaster strikes. And for many data centre operators’ customers, this is non-negotiable, given their dependence on the often mission-critical systems the data centres house.

However, just as with ensuring physical security, implementing systems for fully redundant facility operation is not simply a matter of installing more of the latest equipment. Ensuring data centre redundancy is a hugely complex undertaking. Initial design is clearly important, as is the correct installation and interlinking of redundant systems, whether for power, cooling, monitoring, or communications. But most important of all, once again, are the protocols and procedures that must be implemented and followed in order to ensure that redundant gear actually kicks in to action if and when it needs to.

Regardless of whether the data centre in question is hyperscale or a relatively small edge facility, having the right processes in place and the right people following them are typically what makes the difference between a data centre’s security being fully maintained, or a catastrophic failure.

So when securing even the most technical of environments, technology is only part of the answer. Without the disciplined application of associated policies and processes, success cannot be guaranteed. After all, the best tools in the tool box are of little value without the appropriate knowledge and experience to use them.