Vishay Intertechnology today announced that it will be showcasing the company's latest industry-leading multi-layer ceramic chip capacitors and surface-mount and wire-bondable thin film products at the 2013 IEEE MTT International Microwave Symposium, being held from June 2-7 at the Washington State Convention Center in Seattle.

Vishay Intertechnology, Inc today announced that the company has enhanced its ACAS 0606 AT and ACAS 0612 AT precision thin film chip resistor arrays with tighter absolute tolerance, relative tolerance, and relative TCR for the new S, T, and U accuracy grades. Offering two and four integrated resistors on one substrate, respectively, the ACAS 0606 AT and ACAS 0612 AT lower costs when compared to using multiple high-precision discrete resistors, wh...

Vishay Intertechnology Inc today broadens its optoelectronics portfolio with the introduction of two new high-speed 850 nm and 940 nm infrared emitters and a package-matched high-speed silicon PIN photodiode with high radiant sensitivity from 780 nm to 1050 nm. The VSMG10850, VSMB10940 and VEMD10940F offer an ultra-wide ± 75° angle of half intensity in a compact side-view surface-mount package measuring 3 mm by 2 mm and a height of only 1 mm.

Vishay Intertechnology release four new 1 A miniature glass passivated single-phase bridge rectifiers in the surface-mount MBLS package featuring a low typical height of 1.4 mm. Offering high reverse voltages to 1000 V, the MBL104S, MBL106S, MBL108S, and MBL110S are ideal for AC/DC full-wave rectification in smartphone chargers.

Vishay Intertechnology today announced its technology line-up for PCIM Europe 2013, taking place May 14-16 in Nuremberg, Germany. In Hall 9, Booth 9-212 at the Exhibition Centre Nuremberg, the Company will be highlighting its industry-leading power MOSFET, passive component, and diode technologies for a wide range of applications.

Vishay Intertechnology today announced the availability of free Android software designed to simplify the use of the company's VCNL4020 and VCNL3020 integrated proximity and ambient light sensors in any mobile device running Android 4.0.1 software or higher.

Vishay today introduced two new slew-rate-controlled p-channel high-side load switches designed for 1.5 V to 5.5 V operation. The SiP32458 and SiP32459 each offer an integrated gate pump that provides low and flat on-resistance down to 20 mOhm, while maintaining a low quiescent current. Offered in a compact 6-bump wafer-level CSP package, the devices feature a controlled slow turn-on slew rate of 3 ms typical at 4.5 V to limit the in-rush current...

Vishay Intertechnology today released a new n-channel TrenchFET power MOSFET in the thermally enhanced PowerPAK SO-8 package that extends the company’s ThunderFET technology to 150 V. The Vishay Siliconix SiR872ADP offers low on-resistance of 18 mΩ at 10 V and 23 mΩ at 7.5 V, while maintaining low gate charge, 31 nC typical at 10 V and 22.8 nC typical at 7.5 V.

Vishay introduce a new high-performance metallized polypropylene film snubber capacitor. Configurable for direct mounting on insulated gate bipolar transistor modules, the Vishay Roederstein MKP386M features a wide capacitance range from 0.047 µF up to 10 µF, high-temperature operation to + 105 °C, and seven voltage ratings from 700 VDC to 2500 VDC and 420 VAC to 800 VAC.

Vishay Intertechnology today announced that it will be showcasing the company’s latest industry-leading component solutions from its Vishay ESTA, Vishay Sfernice, Vishay Dale, Vishay HiRel Systems, and Vishay BCcomponents product portfolios at HANNOVER MESSE 2013, taking place April 8-12 in Hannover, Germany.

Vishay Intertechnology, Inc is broadening its optoelectronics portfolio with the introduction of high-power, high-speed 850 nm, 890 nm, and 940 nm infrared emitters in gullwing, reverse gullwing, and side-view surface-mount packages with wide-view dome lenses.

Vishay Intertechnology have today introduced a new surface-mount Power Metal Strip resistor featuring a wide side terminal construction that yields a high 2 W power rating in the compact 1020 case size. The WSL1020 combines its high power-to-footprint-size ratio with extremely low resistance values down to 0.003 Ohm and stable resistance tolerances to 0.5 %.

Vishay today announced that it has extended its E/H series of MIL-PRF-55342-qualified thin film surface-mount resistor chips to offer an S level failure rate of 0.001 % per 1,000 hours in 12 case sizes. The QPL devices are qualified to TCR characteristics E, H, K, L, and M.

Vishay Intertechnology today released the VACR, a series of compact aluminum-housed resistors with power ratings up to 500 W. The new devices will serve in industrial, motor drive, railway, renewable energy, and other high-power systems as braking, chopper, pre-discharging, and voltage-limiting resistors, among other applications.

Vishay Intertechnology, Inc is broadening its optoelectronics portfolio with the release of two new series of 4-pin, low input current optocouplers with phototransistor output. The devices feature low DC input currents of 1 mA (VOS618A) and 5 mA (VOS617A) and are offered in the compact SSOP-4 mini-flat package, which saves more than 60 % of board space compared with a DIP-4 package.

Vishay will be showcasing its latest industry-leading Vishay Electro-Films solutions at the 2013 Optical Fiber Communications Conference and Exhibition/National Fiber Optic Engineers Conference, taking place from Mar. 17-21 at the Anaheim Convention Center in Anaheim, California. In booth 3343, products on display will include a wide range of Vishay EFI custom submounts, high-performance RF capacitors, and wire-bondable products.

Vishay Intertechnology reveal its technology line-up for the Applied Power Electronics Conference and Exposition 2013, taking place March 17-21 in Long Beach, Calif. In booth 113, Hall A, the company will be highlighting its latest industry-leading power MOSFET, passive component, diode, and power IC technologies for a wide range of applications.

Vishay Intertechnology have today announced the release of a new axial cemented wirewound safety resistor specially designed to ensure safe and silent fusing operation during overload conditions in electric appliances, energy meters, and power supplies. Featuring a fusing time of < 30 s for a 45 W overload and high surge voltage capability, the new Vishay Draloric AC03..CS offers a special cement coating for immediate interruption without flame a...

To meet the demanding needs of pyrotechnic engineers, Vishay Intertechnology, Inc today introduced a new massive electro-pyrotechnic ignitor chip (MEPIC) resistor offering Joule effect or flash ignition for fast firing times down to 250 µs. The device — based on an established technology used in the automotive industry — is available in wraparound or flip chip versions, or as the industry's first MEPIC resistor to be integrated ...

Vishay Intertechnology today introduced a new version of its free ThermaSim online thermal simulation tool for power MOSFETs, microBUCK power ICs, and DrMOS products: ThermaSim 3.0. For precise analysis of simulated temperature profiles, the latest version of ThermaSim has been enhanced with a number of key features such as temporal zooming of die temperature with respect to power, and the ability to define more real-world conditions for increase...