Teledyne LeCroy is continuing to set the oscilloscope bandwidth pace. Today (Nov 11) at the electronica exhibition in Munich, the company introduced a 100GHz instrument – the LabMaster 10-100Zi. The company says that it has already identified customers for the high-end oscilloscope and expects more to follow as research companies in particular become aware of its capabilities.

Teledyne LeCroy has introduced three-phase Motor Drive Power Analyser software for its HDO8000 oscilloscopes. The HDO8000 mixed-signal oscilloscopes, with 8 input channels, 12-bit resolution, and up to 1 GHz bandwidth, enable motor drive embedded control and power section debug.

Teledyne LeCroy’s new WaveSurfer 10 oscilloscope combines the MAUI advanced user interface with powerful waveform processing, in addition to advanced math, measurement and debug tools, to quickly analyse and find the root cause of problems. Built on the WaveSurfer platform that pioneered large screen, small footprint oscilloscopes, the new oscilloscope provides a 10.4in touch screen display, high performance hardware and compact form factor...

Teledyne LeCroy has introduced a touch screen as well as powerful debug tools and advanced triggering with the WaveJet Touch oscilloscope, claiming an unprecedented combination of performance and price.Built on the WaveJet 300 oscilloscope platform, the WaveJet Touch is available in two models with 350 MHz or 500 MHz bandwidth, four channels, up to 5 Mpts of memory at 2 GS/s, and a 7.5in touch screen display.

Teledyne LeCroy’s new WaveSurfer 3000 series of oscilloscopes feature the MAUI advanced user interface,previously available only on higher-end oscilloscopes. It seamlessly integrates a deep measurement toolset and multi-instrument capabilities into a cutting edge user experience centered on a large 10.1in touch screen, the largest display and only touch screen in this class of oscilloscope.

Further, finer, faster is how Teledyne LeCroy is describing its HDO8000 oscilloscope product line launched today (June 17). The further is 8 analog input channels, the finer is 12-bits of vertical resolution utilising Teledyne LeCroy’s HD4096 high definition technology, and the faster is up to 1 GHz of bandwidth. A wide variety of mixed-signal, serial data, long memory, and probe options and accessories are available with the HDO8000 oscill...

Three new models have been added to the Teledyne LeCroy WaveStation series of function/arbitrary waveform generators. Bandwidth is increased up to 160MHz and 500MS/s sample rate — over three times more bandwidth and four times more sample rate than the existing models.

The HDO4000-MS and HDO6000-MS high definition oscilloscopes from Teledyne LeCroy combine 16 channels of flexible mixed signal capabilities with HD4096 high definition technology, long memory, and a compact form factor, in bandwidths from 200MHz to 1GHz. All HDO models sport a large 12.1in. touch-screen display and intuitive interface to enhance operation.

This video from Teledyne LeCroy shows a successful demonstration of the world's first 100 GHz real-time oscilloscope.

Teledyne LeCroy has added the SierraNet M168 and its new FlexPort Technology to the SierraNet product family. The SierraNet M168 is an 8-port multi-protocol analyser and error injector supporting up to 16G Fibre Channel and 10Gbps Ethernet protocols. FlexPort and 40Gbps Ethernet analysis and error injection capabilities have been added to the SierraNet M408.

Teledyne LeCroy today announced the addition of the SierraNet M168 and its new FlexPort Technology to the SierraNet product family. The SierraNet M168 is an 8-port multi-protocol analyzer and error injector supporting up to 16G Fibre Channel and 10Gbps Ethernet protocols.

A PCI Express protocol analyser with interchangeable interposers for probing has been unveiled by Teledyne LeCroy. The analyser supports PCIe data transmission rates up to 5GT/s and data lane widths up to x4 in a single compact unit measuring 9in. in width x 6.1in. depth x 1.7in. height. The company says that it provides a solution for system implementers by providing powerful data capture and analysis. It also supports upgrade paths from low-cos...

Teledyne LeCroy announce its most cost-effective PCI Express protocol analyzer with interchangeable interposers for probing. The new compact but feature-packed Summit T24 Protocol Analyzer features a small chassis footprint while maintaining the same data analysis features found in the top-of-the-line Summit T3-16 protocol analyzer. The Summit T24 protocol analyzer supports PCIe data transmission rates up to 5 GT/s and data lane widths up to x4 i...

Teledyne LeCroy has upgraded the Kibra 480 DDR protocol analyzer platform with probing options to support DDR3 SO-DIMMs with Error Correction Code. The new interposers operate non-intrusively to monitor ECC SO-DIMM operating at speeds up to 2133 MT/s.

Teledyne LeCroy announces the addition of DDR4 physical layer compliance test capability through the DDR4 Lighthouse Partners Program. DDR4 developers who are looking to validate their design will benefit from joining the Lighthouse Partners program which provides early access to design validation software.

Teledyne LeCroy today announced the availability of a SFF-8639 single-port interposer card for analysis of Solid State Drives based on PCI Express protocols. The SFF-8639 Interposer Card, used with a Summit Protocol Analyzer, enables PCIe bus traffic between a host backplane and SSD device to be monitored, captured, and recorded for protocol analysis.

Teledyne LeCroy today introduced its most cost-effective PCI Express protocol analyzer with interchangeable interposers for probing. The new compact but feature-packed Summit™ T24 Protocol Analyzer features a small chassis footprint while maintaining the same data analysis features found in the top-of-the-line Summit T3-16 protocol analyzer.

Teledyne LeCroy today announced the availability of TeleScan PE, the third-generation configuration space scanning and editing software application, now supporting PCI Express 3.0 technology. TeleScan PE provides system scan, read, write and decode features for PCI Express designs up to PCIe 3.0 specification, and is supplied free of charge.

Teledyne LeCroy, in conjunction with Coherent Solutions announces the culmination of development work to produce a 45 GHz Optical Modulation Analyzer — the highest real-time bandwidth available in the market. The system is capable of testing DP-QPSK and DP-16-QAM optical signals at speeds up to 85 GBaud. This new product will be exhibited at OFC/NFOEC 2013 in Anaheim, California, and is expected to be available in the second quarter of 2013. Fi...

Teledyne LeCroy Corporation today announced the industry's first Manchester and non-return-to-zero configurable protocol decoders for a wide range of oscilloscope platforms. The decoders enable users to specify a broad range of physical layer characteristics for Manchester- or NRZ-encoded signals. The decoders define the grouping of bits into words, and words into frames, which makes short work of analysis for custom and/or proprietary protocols ...