Teledyne Test Tools (T3) is a branded portfolio that adds a comprehensive range of test equipment to the Teledyne LeCroy product offering. T3 products complement and leverage Teledyne LeCroy’s oscilloscope technology and are supported by the Teledyne LeCroy Sales and Customer Care organisations.

Teledyne LeCroy has announced the WavePro HD high-definition oscilloscopes, which combine for the first time HD4096 12-bit technology and 8GHz bandwidth for low noise and pristine signal fidelity. With a maximum of 5 Gpoints of fast, responsive, and easily navigable acquisition memory, also an industry first, WavePro HD oscilloscopes also acquire extremely fine waveform details over long periods of time. A deep, powerful toolset quickly exposes u...

The new WaveSurfer 3000z oscilloscopes have been announced by Teledyne LeCroy, which expand the existing WaveSurfer 3000 bandwidth range above and below that of earlier models, while also bolstering functionality for power-electronics testing. In addition, the new models provide more processing power and memory.

Provider of oscilloscopes, protocol analysers and related test and measurement solutions, Teledyne LeCroy has launched the SAM40 which provides up to 24 input channels for low frequency (sensor signal) acquisition and analysis. It connects to a four or eight channel Teledyne LeCroy 12-bit resolution high definition oscilloscope (HD4096 HDOs and MDAs) to provide Analog+Digital+Sensor (up to 8+16+24 channel) acquisitions.

Teledyne LeCroy has announced the introduction of the HDO4000A, HDO6000A, HDO8000A, and MDA800A analogue and mixed-signal oscilloscopes. These four high-definition oscilloscope product lines range from 200MHz-1GHz bandwidth and utilise 12-bit HD4096 technology. This technology arrived in 2012 and remains in the market place.

The HVFO high voltage fibre-optically isolated oscilloscope probe has been unveiled by Teledyne LeCroy. The probe adds to other solutions such as the only HV differential probe rated for 1500Vdc common-mode testing. The HVFO is an affordable, optimally designed probe for measurement of small signals floating on a HV bus in power electronics designs.

Two products have been launched by Teledyne LeCroy: the RP4030 active voltage rail probe and a MIPI System Power Management Interface (SPMI) serial decoder. The RP4030 probe measures small signal variations on a DC power/voltage rail, while the SPMI decoder monitors and correlates SPMI serial bus messages with DC power/voltage rail changes. 

Two new products, the RP4030 active voltage rail probe and an industry first MIPI System Power Management Interface (SPMI) serial decoder have been launched by Teledyne LeCroy. The RP4030 probe measures small signal variations on a DC power/voltage rail, while the SPMI decoder monitors and correlates SPMI serial bus messages with DC power/voltage rail changes.

The HDO9000 High Definition Oscilloscopes unveil HD1024 high definition technology that automatically optimises vertical resolution under each measurement condition to deliver 10 bits of vertical resolution. The oscilloscopes combine next-generation MAUI with OneTouch user interface with a big, bright, 15.4-in touch screen. The addition of the HD1024 technology to an exceptionally deep analysis toolbox enables the HDO9000 to easily uncover diffic...

A new member has been added to the quantumdata 780 series handheld test instruments from Teledyne LeCroy. The new 780E Multi-Protocol Analyser / Generator is equipped with DisplayPort input and output ports making it the only portable instrument capable of testing HDMI, HDBaseT and DisplayPort devices and distribution networks including HDCP 2.2 verification.

The Serial Data Analysis capabilities for Teledyne LeCroy’s oscilloscope solutions have been enhanced by Eye Diagram capabilities in the new TDME Serial Bus options. The company is offering the widest range of Trigger (T), Decode (D), Measure/Graph(M or G) and Eye Diagram and Physical Layer (E or P) options.

A new member of the quantumdata 780 series handheld test instruments has been introduced by Teledyne LeCroy. The 780E Multi-Protocol Analyser / Generator is equipped with DisplayPort input and output ports making it capable of testing HDMI, HDBaseT and DisplayPort devices and distribution networks including HDCP 2.2 verification.

The WaveRunner 8000 oscilloscopes with bandwidths from 500 MHz to 4 GHz have been launched by Teledyne LeCroy. The instruments deliver an extensive toolbox coupled with a superior user experience to expedite solving debug problems. The WaveRunner 8000 marks the debut of the next-generation MAUI advanced user interface, bringing enhancements to the oscilloscope’s UI. The addition of OneTouch to MAUI makes measurement setup incredibly easy, s...

The HDA125 High-speed Digital Analyser launched by Teledyne LeCroy expands the capabilities of its oscilloscope range. The HDA125 digital acquisition system captures 18 channels of digital data at 12.5GS/s. It can be added to Teledyne LeCroy oscilloscopes by means of the LBUS interface architecture.

A PCI Express (PCIe) protocol exerciser/analyser for testing PCI Express 4.0 designs and products has been introduced by Teledyne LeCroy. The Summit Z416 exerciser/analyser addresses the needs of PCI Express developers by providing high performance 16GT/s traffic generation on devices with link widths up to 16 lanes. In addition to traffic generation, protocol analysis featuring Teledyne LeCroy’s industry-standard CATC Trace and other traff...

The IQS series of Coherent Optical Receivers extends Teledyne LeCroy’s Optical Modulation Analysis (OMA) portfolio, enabling the creation of flexible, modular systems. When combined with Teledyne LeCroy’s LabMaster 10Zi-A oscilloscopes and integrated Optical-LinQ analysis software, the IQS receivers test DP-QPSK and DP-16QAM optical signals at speeds up to 130GBaud.

Symbolic (Application) layer analysis capabilities have been added to Teledyne LeCroy’s CAN and CAN FD serial trigger, decode, measurement, and graphing solutions. The new CAN and CAN FD Symbolic analysis packages allow a user-defined .dbc file to be used for Symbolic triggering, decoding, measurements, and graphing of a CAN or CAN FD bus.

The CP030A and CP031A high sensitivity current probes from Teledyne LeCroy provide sensitivity down to 1mA/div allowing users to measure current from the mA range up to a continuous current of 30Arms and peak current of 50A all with the same probe. The probes provide a small form factor for today’s crowded boards.

Teledyne LeCroy has made significant enhancements to the two high performance oscilloscope product lines in the company’s portfolio. The LabMaster 10 Zi-A delivers improved performance in effective number of bits and baseline noise along with the industry leading jitter measurement floor. The WaveMaster 8 Zi-B features increased sample rate, lower noise, enhanced processing capabilities and the latest version of Teledyne LeCroy’s osci...

Teledyne LeCroy’s MDA800 Series of Motor Drive Analysers (MDAs) combine three-phase power analyser static (steady-state) calculations, unique dynamic three-phase power and mechanical motor analysis capabilities, as well as high bandwidth (1 GHz) embedded control system debug in a single instrument.