Stackpole Electronics Inc
- 2700 Wycliff Road
Suite 410
Raleigh
NC 27607
United States of America - +1 (919) 850-9500
- http://www.seielect.com
- +1 (919) 850-9504
Stackpole Electronics Inc Articles
MLFA AEC compliant melfs in stock
Stackpole is now stocking the MLFA AEC compliant metal film melf resistors. The MLFA is available in a 0.4W rated 0204 size in the MLFA25 and a 1W rated 0207 size in the MLFA1. The MLFA has exceptional stability demonstrated over life, biased humidity, and short time overload testing. In addition, the MLFA offers pulse power handling up to 3500 watts for single short duration pulses, and lightning surge withstanding up to 6KV for resistance value...
HVA series high voltage thru-hole resistors in stock
Stackpole is now stocking the most popular sizes and resistance values of its HVA Series. The HVA Series offers high voltage handling up to 8000V in a small package size. The RoHS compliant and halogen free HVA Series offers resistance values from 1M up to 1G in tolerances as low as 1% and in 200ppm TCR. The high voltage film achieves VCR of 20ppm/V or better.
Compact SMD 5W current sense resistors
It has been announced that Stackpole's new HCSM2818 is a 5W surface mount part with an all-metal element and moulded construction. The HCSM2818 is available in resistance values of four, five, ten, 15, and 20mΩ in one and five percent tolerances. TCR is 200 ppm for the values below ten milliohm and 75ppm for values of ten milliohm and above.
SMD high current jumpers in sizes from 0402 to 2512
Stackpole's HCJ Series, a surface mount chip jumper, offers current ratings ranging from 14.2amps for the 0402 up to 63.2amps for the HCJ2512. In comparison, the typical rated current for a standard 2512 thick film jumper is 3amps. The HCJ0402 has a maximum resistance of 3mΩ while the other sizes have a maximum resistance of 0.5mΩ. This ensures much lower power dissipation for the HCJ compared to similar jumpers with typical resi...
SMD versions of disk varistors
It has been announced by Stackpole, that the PV Series offers two chip sizes, 3225 and 4032. These two sizes correspond to the equivalent five and seven millimetre disk MOV's offering protection for circuits with working voltages ranging from 11 to 300VRMS.
IEC high voltage pulse handling up to 7kV
It has been announced that Stackpole's RNV Series meets IEC 60065.14.1 standards handling up to 7kV for 50 discharges of a 1nF capacitor.
Leaded MOV's designed for overvoltage protection
Stackpole's RV series of radial leaded metal oxide varistors is available in a wide range of disk sizes and working voltages designed for general purpose overvoltage protection. The RV series is UL1449 certified and offers disk sizes from 5 up to 20mm with peak current ratings up to 18,000A and energy handling up to 792J. The RV series offers protection for electronics with operating voltages ranging from 14 to 1,465VDC.
Four terminal shunts for high sensing efficiency
The HCSK Series from Stackpole is a surface mount metal element high current shunt with four terminals. Four terminal Kelvin sense resistors provide accurate sensing as it removes the effect of lead resistance in the sensing function. The HCSK2725 rated at 5W at an ambient temperature of 100ºC utilises materials and a raised element which provides tolerances as low as 1% and TCR of 50ppm/ºC.
Axial leaded resistors offer anti-moisture performance
The HDM Series from Stackpole is an axial leaded carbon film technology resistor with moisture withstanding capability. Axial leaded resistors that need to withstand high humidity typically require a metal glaze technology which is considerably more expensive. The HDM Series can survive 100 hours in a pressure cooker at 120°C, over 98% relative humidity and two atmosphere’s pressure while standard carbon film and metal film resistors wo...
Axial leaded resistors designed for high voltage handling
Stackpole has announced the release of the HVAM Series, an axial leaded series of precision resistors designed for high voltage handling and high resistance values. The HVAM offers resistance values from 500K ohms to 10G ohms depending on size and tolerance.
Chip resistors offer voltage ratings up to 20KV
Global manufacturer of resistors, Stackpole, has announced its UHV series which offers high voltage ratings per package size. The UHV2010 is rated up to 6KV, UHV2512 rated up to 10KV, UHV3512 rated up to 12KV, UHV4020 rated up to 16KV and UHV5020 rated up to 20KV.
Current sense chip resistors offer low values in small sizes
The CSRF series from Stackpole is a foil on ceramic carrier technology which offers very low resistance values and low TCR in small chip sizes. With 0.25W rated 0402 size chips in values down to 3Ω and 0.5W rated 0603 size chips in values down to 2.5Ω, the CSRF is a suitable choice for electronics.
Thin film resistors available with 0.01% tolerance
Global manufacturer of resistors, Stackpole, has announced an AEC-Q200 compliant series of precision thin film chip resistors. The RNCF offers sizes from 0201-2512, with a tolerance of 0.01% and TCR of 2ppm available for a select value range for sizes from 0402-2512.
Qualified thick film chips available in decade value design kits
Global manufacturer of resistors, Stackpole Electronics has announced its RMCF series which is aAEC-Q200 qualified series of thick film chip resistors. This series has thousands of the most popular values in stock in sizes from 0201 through 2512.
High voltage axial leaded resistors suitable for aerospace
The HVAM series of high voltage axial leaded resistors has been released by Stackpole Electronics. The HVAM deposition technology produces a non-inductive resistive element with high stability, low noise and high voltage ratings. Precision tolerances are available down to 0.1% with TCR as low as 50ppm.
High voltage chip resistors designed for voltage dividers
The UHV series of ultra high voltage chip resistors from Stackpole Electronics are now in stock in the most popular sizes and resistance values. Values of 500M, 1G, and 2G are in stock in sizes from 2010 to 5020. This enables designing and prototyping high voltage designs in far less time than usual.
Nitride precision chip resistors add 10ppm TCR capability
Stackpole has announced its AEC qualified RTAN series which utilises tantalum nitride technology to provide moisture proof precision chip resistor performance. The RTAN film passes biased humidity testing at 85°C, 85% relative humidity, and ten percent bias with very little shift in resistance. The materials and design are such that the RTAN is resistant to sulfur contamination and will pass the industry standard sulfur test ANSI/EIA-977 (Met...
Anti-surge thru-hole resistors offer high voltage pulse handling
Global resistor manufacturer, Stackpole, has announced its ASR/ASRM series anti-surge thru-hole resistors offer high voltage pulse handling and defined pulse power characteristics. From the ASRM14 1/4W size rated at 500V to the ASRM1 1W and ASRM2 2W both rated at 4KV, this series is a suitable choice for high voltage applications requiring a robust cost effective axial leaded resistor.
RNCS kits for prototyping precision anti-moisture applications
Stackpole Electronics offers engineering sample kits for their popular RNCS Series of anti-moisture thin film chip resistors. The RNCS0603BKE kit offers 20 pieces each of the 45 most popular 0603 values ranging from 49.9 ohms up to 249K in 0.1% tolerance and 25 ppm TCR. The RNCS0805BKE kit offers 20 pieces each of the 47 most popular 0805 size values from 10 ohms to 499K also in 0.1% tolerance and 25 ppm TCR. Parts are packaged in cut tape and pr...
Metal oxide varistors provide over voltage protection
Stackpole's RV series of radial leaded metal oxide varistors are in stock in a wide range of sizes and working voltages. The RV series is UL1449 certified and is available in sizes from 5 up to 20mm with peak current ratings up to 18,000A and energy handling up to 792J.