Cooper General Global Services, a leading wireless device repair and refurbishment company, has chosen the R&S CMX500 and R&S CMW500 wideband radio communication testers from Rohde & Schwarz to support 4G/LTE and 5G device repair and refurbishment.

While many employees have had to work from home due to the coronavirus pandemic, this is rarely an option for engineers who need constant access to test equipment. However, as Rohde & Schwarz explain, you can bring the test lab home.

With the TS8980 Rohde & Schwarz has fulfilled the certification entry criteria (CEC) for an increased number of the Global Certification Forum's (GCF) work items (WI) and PCS Type Certification Review Board (PTCRB) requests for 5G FR1 RF conformance testing.

The new R&S SZV100A RF upconverter from Rohde & Schwarz can test broadband transponders in the payloads of very high throughput satellites (VHTS).  

Many employees have to work at home due to the corona pandemic. This is rarely an option for engineers who need constant access to test lab equipment. However, there are workarounds. Remote control of test equipment has been standard practice in labs and system houses for many decades.

The R&S SMCV100B is an economy signal generator from Rohde & Schwarz that covers the 5G NR extended FR1 frequency range up to 7.125 GHz.

Advanced driver assistance systems (ADAS) require high bandwidth and low latency communications. Automotive Ethernet is becoming the de-facto communication solution to handle these requirements by offering higher data rates as well as time-sensitive network capabilities.

Electro Rent, a provider of test and technology solutions and services, has been named preferred partner by Rohde & Schwarz for rental solutions across Europe signalling closer collaboration between the two companies.

Watch our new webinar and find out the basics of the wireless Industrial Internet of Things (IIoT) using wireless technologies from Bluetooth to 5G for industrial environments. The webinar also offers information on important challenges of IIoT such as low and deterministic latency, as well as ways to master them. Additionally, it will demonstrate how dedicated measurement solutions can help to understand and optimise key performance ch...

Rohde & Schwarz has expanded its 5G NR testing portfolio with the R&S PWC200, developed for 5G massive MIMO base station testing for both production and R&D. The plane wave converter supports a large part of 3GPP certifications and features a bi-directional array of 156 wideband Vivaldi antennas placed in the radiating near-field area close to the device under test (DUT).

Rohde & Schwarz has successfully installed an AI-based RF test system for digital TV compliance test in Vietnam. The combination of R&S BTC Broadcast Test Center and RFSpark RF automation unleashed the full capacity of R&S BTC, enabling test labs and TV/STB manufacturers to conduct compliance test in the most cost-effective manner.

An expert group with collective knowledge of microwave signal transmission initiated the joint project to develop and implement a new coaxial connector optimised for E-band frequencies. Emerging applications in particular for automotive radar from 76 to 81GHz, plus the WiGig extension IEEE 802.11ay operating up to 71GHz, highlighted the need for a novel, robust coaxial connector suitable for industrial applications at frequencies up to 90GHz...

PCTEST Engineering Laboratory which recently became part of the Element Materials Technology Group, has acquired the latest 5G test solutions from Rohde & Schwarz for RF and RRM testing in the FR1 and FR2 frequency ranges.

Test and measurement expert Rohde & Schwarz has provided Acconeer with an R&S FSW85 signal and spectrum analyser. Acconeer will use it to develop A111, its low power pulsed coherent radar sensor that operates in the 60GHz unlicensed frequency band and is particularly suited to IoT applications.

The most easy and accurate way of testing Bluetooth® Low Energy: - Simplifying the test setup - Unifying all Bluetooth® testing (Bluetooth® Classic and Bluetooth® Low Energy) - Supporting all RF conformance tests - Simplifying OTA measurements (TRP/TIS) - Enabling bit rate and packet error rate measurements

The Rohde & Schwarz ESW is an EMI test receiver with outstanding RF characteristics for the measuring range from 1Hz to 44GHz. With its high dynamic range und measurement accuracy, it meets the highest requirements in EMI compliance testing and fulfils the most stringent requirements for all relevant EMI standards such as CISPR, EN, MIL‑STD-461, DO‑160 and FCC.

In late 2019, Löhnert Elektronik, a specialist in custom test benches, was looking for a reliable automotive radome tester for its new test bench and chose the R&S QAR quality automotive radome tester from T&M manufacturer Rohde & Schwarz. The R&S QAR is presently the only tester on the market that can test these radomes quickly and over their full surface area.

For the users of an R&S FSV signal and spectrum analyser, and an R&S SMBV100A or R&S SGT100A vector signal generator, field-to-lab test scenarios are now possible with the R&S IQW100, a wideband I/Q data recorder. Typical applications for the R&S IQW100 are signals for cellular communication, EME, GNSS, or radio or TV broadcast.

Rohde & Schwarz and the cellular IoT company CommSolid by Goodix have partnered up to demonstrate the effectiveness of the NB-IoT Release 15 feature wake up signal in reducing the power consumption of NB-IoT devices. 

Test and measurement supplier Rohde & Schwarz and the cellular IoT company CommSolid by Goodix have partnered to demonstrate the effectiveness of the NB-IoT Release 15 feature wake up signal in reducing the power consumption of NB-IoT devices.