The LTC3870, from Linear, is a dual phase synchronous step-down slave controller that can generate currents up to 240A when paired with a companion master controller by extending the phase count in multiphase applications. Compatible master controllers include the LTC3880 and LTC3883 digital power system management controllers.

A complete ride-through DC/DC system IC, designated the LTC3355, has been announced by Linear Technology. The LTC3355 features a main buck regulator with a built-in boost converter for temporary backup, or ride-through, of VOUT during a sudden loss of VIN power from a single supercapacitor energy source.

A monolithic flyback regulator, designated the LT8301, significantly simplifies the design of isolated DC/DC converters. The device, from Linear Technology, requires no opto-isolator or third winding for regulation due to sampling the isolated output voltage directly from the primary-side flyback waveform.

An ideal diode bridge controller for 9-72V systems, the LT4320 is now available in automotive (H-grade) and high reliability military (MP-grade) versions. The Linear Technology device replaces a full-wave diode bridge rectifier with a low loss N-channel MOSFET bridge in order to reduce the power and voltage losses by ten times or more.

Delivering a low noise, low ripple 15V bias supply, the LT3048-15 is a step-up DC/DC converter with an integrated LDO output from Linear Technology. The LT3048-15 delivers up to 40mA of continuous output current at 15V with output ripple and noise less than 500µVPK-PK and 0.1% load regulation.

A flyback secondary-side synchronous rectifier driver, designated the LT8309, replaces the output diode with a MOSFET, allowing up to 10A output current without the use of a heat sink. The device, from Linear Technology, operates from a 4.5V to 40V input voltage range.

Designed to extend the life of a primary battery in low power wireless system networks (WSNs), the LTC3107 is a DC/DC converter from Linear. The device combines energy harvesting and power management capability with a primary battery cell to extend the battery’s usable lifetime. 

Featuring flexible differential inputs, the LTC2323-16 is a dual 16-bit simultaneous sampling, successive approximation register (SAR) ADC from Linear Technology. This device leads a family of 16-, 14- and 12-bit SAR ADCs, featuring sample rates of 5Ms/s and 2Ms/s while achieving 81dB SNR at 16-bits, 80dB SNR at 14-bits and 73dB SNR at 12-bits.

Designed to protect against high voltage transients and continuing operation during automotive cold crank, the LT3840 is a synchronous, step-down DC/DC controller from Linear Technology. It is suitable for applications including 12 or 24V automotive, heavy equipment, industrial control, robotics and telecomms.

Replacing rectifying boost diodes with high efficiency N-channel MOSFETs, the LTC3784 high power two phase single output synchronous step-up DC/DC controller has been introduced by Linear Technology. It can produce a 24V output at 10A from a 12V input at up to 97% efficiency without a heat sink.

Featuring active charge balancing for 1 or 2 series supercapacitors, the LTC3128 high efficiency, input current-limited buck-boost supercapacitor charger has been introduced by Linear Technology. The LTC3128 is suitable for safely charging and protecting large capacitors in backup power applications.

This video explores the LT3086, a new member of our LDO+ family. It provides many functions in addition to regulation. It can monitor and externally limit both temperature and output current, has an accurate power good output, and can compensate for wire drops between the regulator and the load. It sources up to 2.1A of output current and devices can be paralleled to obtain higher output current.

Linear Technology annonce le LTC3638, un convertisseur abaisseur, de fort rendement, pouvant accepter 140V en entrée et fournir un courant continu de sortie jusqu’à 250mA. Il fonctionne à partir d’une gamme de tensions d’entrée de 4V à 140V, de ce fait il convient aux applications des télécommunications, de l’industrie, de l’avionique et de l’automobile. Le LTC36...

Opertating an input voltage range of 4V to 140V, Linear's LTC3638 buck converter is designed for use in telecom, industrial, avionic and automotive applications. The high efficiency buck converter delivers up to 250mA of continuous output current and utlilises internal synchronous rectification.

Delivering efficiency as high as 95%, Linear's LT8612 is a 6A, 42V input capable synchronous step-down switching regulator. Boasting a 3.4V to 42V input voltage, the incorporated Burst Mode operation keeps quiescent current under 3µA in no-load standby conditions. These features makes the regulator suitable for automotive and industrial applications.    

Linear Technology annonce le LTC5577, un mélangeur infradyne, actif, de 300MHz à 6GHz, avec un IIP3 (point d’interception du 3ème ordre en entrée) de +30dBm et un gain de conversion de 0dB. Le LTC5577 présente une large gamme de fréquences de fonctionnement, couvrant toutes les bandes des téléphones cellulaires de 450MHz à 3,6GHz avec un seul composant. De plus, son port de sort...

Covering all 450MHz-3.6GHz cellular bands with a single part, the LTC5577 active downconverting mixer has been introduced by Linear. Offering outstanding +30dBm Input Third Order Intercept and 0dB conversion gain, the mixer's very low LO to RF leakage enable receivers to satisfy spurious emissions requirements with little or no RF input filtering.

Now available in high reliability H grade and military MP grade versions, the LTC3612 is a 4MHz synchronous buck regulator from Linear Technology. Incorporating a constant frequency, current mode architecture, the high efficiency step-down regulator is suited for applications including POL supplies, distributed power supplies, portable computer systems, DDR memory termination, handheld devices.

Linear Technology annonce les nouvelles versions de haute fiabilité classe H et militaire classe MP du LTC3612, un régulateur abaisseur, synchrone 4MHz, de haut rendement, qui possède une architecture à mode courant et à fréquence fixe. Le composant peut fournir une intensité continue de sortie jusqu'à 3A, pour des tensions de sorties aussi basses que 0,6V, à partir d’un bo&icir...

The company's first synchronous SEPIC, inverting, boost and flyback multi-topology DC/DC controller, the LT8710 has been introduced by Linear Technology. The power IC is suitable for applications including lead acid battery chargers, automotive ECU power, solar panel power converters, high power local power supplies and wide input voltage range SEPIC/inverting.