Companies

Future Technology Devices International Limited

  • Unit 1 2 Seaward Place Centurion Business Park Glasgow
    G41 1HH
    United Kingdom
  • +44 (0) 141 429 2777
  • http://www.ftdichip.com
  • +44 (0) 141 429 2758

Future Technology Devices International Limited Articles

Displaying 21 - 40 of 58
Cables/Connecting
19th June 2012
FTDI Delivers Connectivity Solutions for Raspberry Pi Mini Computer

Future Technology Devices International Limited has added to its range of connectivity offerings with two new products that address the rapidly growing popularity of the Raspberry Pi computing platform. The TTL-232R-RPi is a USB-to-TTL Serial UART debug cabling solution that incorporates the company’s FT232RQ high performance interface IC.

Cables/Connecting
26th March 2012
FTDI Unveils USB-to-RS232 Cabling Solution

Future Technology Devices International Limited has expanded its portfolio of converter cabling solutions with the introduction of Chipi-X. Measuring a length of 10 cm, this is a USB-to-RS232 level full-handshake UART cable with a male DB9 connector. The DB9 provides the connectivity for RS232 communications and a USB-A plug deals with USB communications.

Analysis
21st December 2011
FTDI Expands Vinculum-II Precompiled Firmware & Source Code Offering

USB solutions specialist Future Technology Devices International Limited (FTDI) has introduced additional elements to its family of precompiled, bridging ROM files that support its Vinculum-II (VNC2) USB host/device controller ICs. These files can be loaded directly into a VNC2 IC and utilised by its 16-bit microcontroller core in order to perform basic data transfer operations between common interfaces.

Cables/Connecting
4th August 2011
USB to Digital Level Interface Cabling Solutions from FTDI

USB solutions specialist Future Technology Devices International Limited (FTDI) has added two new cables to its USB to digital level serial interface portfolio. The new C232HM-DDHSL-0 (3.3 V output power) and C232HM-EDHSL-0 (5V output power) USB 2.0 Hi-Speed to Digital Level Multi-Protocol Synchronous Serial Engine (MPSSE) cables - which form part of its expanding ‘Instant USB cable’ line - offer a fast, simple way to connect devices with 3.3...

Design
13th June 2011
FTDI expedites embedded design projects with new addition to its Vinco offering

USB solutions specialist Future Technology Devices International Limited (FTDI) has further strengthened its Arduino-inspired Vinco platform (which was first announced in November 2010) with the introduction of the VNCLO-START1 kit. This comprehensive new development environment based on the company’s Vinculum-II (VNC2) dual channel USB Host/Device controller effectively gives engineers everything they need for developing next generation embedd...

Design
10th June 2011
FTDI expedites embedded design projects with new addition to its Vinco offering

USB solutions specialist Future Technology Devices International Limited (FTDI) has further strengthened its Arduino-inspired Vinco platform (which was first announced in November 2010) with the introduction of the VNCLO-START1 kit. This comprehensive new development environment based on the company’s Vinculum-II (VNC2) dual channel USB Host/Device controller effectively gives engineers everything they need for developing next generation embedd...

Analysis
16th May 2011
FTDI commits to supporting Android Open Accessories Initiative

Future Technology Devices International Limited (FTDI) will be exhibiting at this year’s Maker Faire – Bay Area (21st & 22nd May, San Mateo Events Center, California). The event, which celebrates innovation at all levels, from the hobbyist through to multinational corporations, is now in its sixth year, and to coincide with this FTDI has announced its commitment to supporting the Android Open Accessories initiative, thus allowing engineers to...

Design
1st March 2011
Single Channel Hi-Speed USB to UART/FIFO Interface IC for Next Generation Peripheral Design

Future Technology Devices International Limited has further strengthened its portfolio of USB interface IC products with the release of the FT232H USB2.0 Hi-Speed device. This versatile single channel USB to UART/FIFO interface device can be configured via EEPROM to use a variety of different serial or parallel interfaces. Bundled with FTDI's well established and proven USB device drivers, this solution enables engineers to easily add Hi-Speed US...

Communications
6th December 2010
New USB Hi-Speed Serial/Hub Module from FTDI brings higher level of connectivity to system designs

Future Technology Devices International Limited (FTDI) eases the integration of USB into existing electronic systems, with the release of the FT4232H USB serial/hub module. Designed to connect to the company’s V2DIPx modules, as well as any USB Host interface (e.g. PC), this product greatly expands the number of interfaces that can be accessed downstream from the Host.

Design
6th December 2010
FTDI unveils VINCULO, a powerful development platform for embedded systems requiring USB 2.0 connectivity

USB silicon and software specialist Future Devices Technology International Limited (FTDI) announced Vinculo, an embedded development platform inspired by the popular Arduino Duemilanove / Uno. The Vinculo platform allows designers to integrate powerful USB 2.0 interfacing by incorporating FTDI’s Vinculum II VNC2-64 dual-channel USB Host/Slave controller with the capability of interfacing to the growing range of I/O application boards (shields...

Cables/Connecting
10th June 2010
FTDI offer enhanced range of USB 2.0 to serial UART converter cables

Future Technology Devices International Limited (FTDI) today announced the availability of their TTL-232RG family of USB to TTL serial UART converter cables. The TTL-232RG cables build upon the existing FTDI family of USB to TTL cables, by offering new versions to support an extended variety of voltage I/O levels. The cables feature a USB to serial converter PCB encapsulated within a standard type 'A' USB connector with a wire-ended asynchronous ...

Cables/Connecting
19th May 2010
FTDI launches USB 2.0 module to replace DB9 RS232 connector on legacy boards

Future Technology Devices International Limited (FTDI) today announced the availability of the DB9-USB-RS232 range of modules, designed to replace a DB9 based RS232 connector, on an existing board design, with a USB 2.0 connector interface. The modules feature a standard USB 'mini-B' type connector in a module that fits the PCB footprint of a standard 9-pin DB9 connector. The modules are designed to provide a fast and simple method of replacing a...

Design
20th April 2010
Vinculum-II VNC2 evaluation modules speeds USB 2.0 Host/ Slave development

Future Technology Devices International (FTDI) announced the launch of a range of VNC2 evaluation modules (V2DIP-x), a VNC2 evaluation kit (V2-EVAL) and a VNC2 debug module. These modules are designed to help designers quickly develop embedded USB 2.0 Host/ Slave designs based on FTDI's recently announced Vinculum VNC2 devices. VNC2 is a user programmable dual USB 2.0 Host/ Slave intelligent SOC controller featuring a customised 16 bit MCU core, ...

Analysis
31st March 2010
Mike Clancy to spearhead Vinculum growth at FTDI

Following the launch of Future Technology Devices International's (FTDI) new Vinculum VNC2 device, the company has appointed Mike Clancy as their Vice President of Sales & Marketing. In this role he will have overall responsible for FTDI's global sales and marketing operations.

Design
2nd March 2010
Programmable dual USB 2.0 host/slave SOC assists in lowering design component count and reduces costs

Future Technology Devices International (FTDI) today announced the launch of their Vinculum VNC2 user programmable dual USB 2.0 Host/Slave intelligent SOC controller. Building on FTDIs competitive advantage of fully supporting designers and customers by delivering a complete solution, VNC2 enhances the initial member of the Vinculum family, the VNC1L, by reducing the device cost as well as introducing the capability for designers to develop thei...

Communications
15th September 2009
USB powered multi-port serial modules ease connectivity between legacy 'RS' interfaces and USB 2.0 Hi-Speed ports

Future Technology Devices International Limited (FTDI) today announced the availability of multi-port variants of its USB powered USB-COM-PLUS family of communication modules. Complementing the previously released single port USB-COM232-PLUS1 module, these new modules are available in RS232 (EIA-232), RS422 (EIA-422) or RS485 (EIA-485) versions. The USB-COM232 modules provide either dual or quad port options. The USB-COM422 and USB-COM485 modules...

Communications
23rd February 2009
USB cables provide RS-422 and RS-485 interface support

Future Technology Devices International (FTDI) has announced the availability of two serial interface converter cables that incorporate transceivers to facilitate connecting RS-422 or RS-485 based peripherals to a PC’s USB port. Using FTDI’s FT232RQ USB to asynchronous serial interface IC, the USB-RS485-WE converter cable includes an RS-485 transceiver while the USB-RS422-WE cable utilises a RS-422 transceiver. The far end of the 1.8m cables ...

Design
16th February 2009
Evaluation modules ease integration and development of USB 2.0 High Speed interfaces

Future Technology Devices International (FTDI) has announced the availability of two evaluation modules to support their recently announced FT2232H and FT4232H USB 2.0 High Speed devices, which have the capability of being configured in a variety of industry standard serial or parallel interfaces such as UART or FIFO. The module PCB measures just 36mm (L) x 30mm (W) x 12mm (H –including connector pins). Each module provides access to all the re...

Communications
16th February 2009
USB module aids connectivity for RS232-based applications

Future Technology Devices International (FTDI) has announced the USB-COM232-PLUS1 module. The first in its family of USB-COM-PLUS modules, the USB-COM232-PLUS1 is a USB to single channel RS232 level serial UART. The module incorporates FTDI’s FT232RQ IC which handles all the USB signalling and USB to UART protocols. The modules provide a fast, simple way to connect devices with a RS232 level serial UART interface ( 9 way standard D-type connect...

Analysis
18th December 2008
BPM Microsystems adds support for Vinculum embedded USB host devices from FTDI

BPM Microsystems, a leading supplier of device programming systems, has announced BPM Microsystem equipment support for Future Technology Devices International’s (FTDI) Vinculum VNC1L embedded USB host controller IC.

First Previous Page 2 of 3 Next Last

Featured products

Product Spotlight

Upcoming Events

No events found.
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier