Small Low Power Complete WiFi Module

No external processor or driver is required, significantly reducing customers integration and development effort. The output power is configurable from 10dBm to 0dBm. Multiple antenna options provide the flexibility for on-board PCB trace, chip, wire, or external U.FL connector.

The RN-171 is a standalone, wireless networking device that supports UDP, TCP, DNS, DHCP, ARP, ICMP, and HTML client. The module is an industrial (-45°C to +85°C) grade temperature range part. The hardware interfaces include 10 bidirectional IO and 8 analog inputs, UART with data rates up to 921Kbps TX, 500Kbps RX, and SPI slave with up to 2.5 Mbps data rate. The onboard hardware crypto engine supports WiFi authentication for WEP-128, WPA-PSK (TKIP) and WPA2-PSK (AES). To obtain technical data sheets, sample requests and pricing please contact Texim Europe.

Features
• FCC / CE/ IC certified 2.4GHz IEEE 802.11b/g transceiver
• Small form factor: 26 x 18 x 3.1mm
• Configurable transmit power: 0dBm to 10 dBm
• RF pad connector for antennas
• Certified antennas: chip antenna, 4 dipole, PCB trace and wire antenna
• Ultra-low power - 4uA sleep, 38mA Rx, 120 mA Tx at 0dBm
• High throughput: 921Kbps TX, 500Kbps RX, up to 2Mbps over SPI slave
• 8 Mb Flash memory and 128 KB RAM
• 10 general purpose digital I/O, 8 analog sensor interfaces
• Real-time clock for wakeup and time stamping
• Accepts 3.3V regulated power supply or 3V battery
• Supports Adhoc and infrastructure networks
• On board complete TCP/IP networking stack
• FCC, IC, EN and WiFi alliance certified

Applications
• Remote monitoring
• Industrial sensors and controls
• Telemetry
• Home automation