Wireless Microsite
Stereo Power Amp Chip Creates 3D Audio Effects for Mobile Phone Platforms
STMicroelectronics has announced a compact audio power amplifier chip – intended for mobile phones and for other portable audio products – which creates 3D audio effects in the stereo speaker outputs to add impact and a surround-sound feel to MP3 and video files. The TS4997 can deliver 1.2W per channel of continuous average output power into 8-ohm loads, from a 5V supply — although it operates from supplies of as little as 2.7V — while its high-efficiency design and ultra-low standby power will help extend battery life.
MobiST’s analog 3D technology, which is integrated in the TS4997, is the simplest in the market; no signal pre-processing is required, and it needs no external components to be added to the compact 4mm square package, minimizing space requirements and ensuring low production cost. A two-pin digital interface controls the 3D effect through independent gain adjustments for each audio channel, while additional left and right channel Standby mode pins allow the supply current to be cut to less than 10nA per channel.
The amplifier chip operates on a 2.7V to 5.5V power supply, providing excellent immunity to supply interference with 85dB PSRR. Signal-to-noise ratio (SNR) is a high 106dB(A), and pop and click interference is suppressed. The device is part of ST’s large portfolio of audio amplifiers designed for portable applications such as mobile phones and laptop PCs.
The TS4997 is available now in a QFN16 4x4mm package, with 0.65mm pad pitch, priced at $1.20 in quantities of 1,000 pieces.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
