Current probes supply measurements down to 1 mA/div
The CP030A and CP031A high sensitivity current probes from Teledyne LeCroy provide sensitivity down to 1mA/div allowing users to measure current from the mA range up to a continuous current of 30Arms and peak current of 50A all with the same probe. The probes provide a small form factor for today’s crowded boards.
The small jaws can probe currents in tight spaces and still clamp onto conductors up to 5mm in diameter. The probes feature a bandwidth of 50MHz and 100MHz, respectively.
The probes expand the capabilities of the Teledyne LeCroy current probe family to a wider range of applications by providing the ability to measure and analyse low current waveforms. The sensitivity of 1 mA/div combined with 1% DC and low frequency accuracy allows for more precise and accurate low current measurements on Teledyne LeCroy oscilloscopes.
When used with HDO high definition oscilloscopes with HD4096 technology, users will obtain highly accurate, low current waveforms with unmatched 12-bit resolution for improved debug and analysis.
Many current probes require external power supplies or amplifiers to display a waveform on the oscilloscope screen. The CP030A and CP031A probes connect to the oscilloscope through the ProBus interface and require no additional hardware.
Along with providing power, the ProBus connection allows the current probe and oscilloscope to communicate, resulting in current waveforms automatically displayed on screen in Amps, and calculated power traces scaled correctly in Watts. This full integration also allows for Degauss and Autozero functions to be done directly from the oscilloscope’s user interface.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
