Test & Measurement

Tektronix Announces Test Tools for SuperSpeed USB

14th October 2008
ES Admin
0
Tektronix has announced a comprehensive test set for the USB 3.0 specification. The high-speed serial data offering will enable customers to rapidly test their SuperSpeed USB designs.
It is estimated that initial SuperSpeed USB interface ICs and consumer products should appear in early 2010, with widespread adoption continuing throughout 2010. The first SuperSpeed USB products will likely include data-storage devices such as flash drives, external hard drives, digital music players, and digital cameras. These will be followed by video products and, eventually data-acquisition systems that need the high data throughput.

“SuperSpeed USB is a giant leap forward in data transfer rates for many devices and consequently requires much more sophisticated testing,” said Ian Valentine, general manager, Technology Solutions Group, Tektronix. “SuperSpeed USB will operate at 5 Gb/s, more than 10 times greater than the existing high-speed USB standard. This speed will require comprehensive signal testing for transmitters, interconnects, and receivers. Customers will be able to fully test the physical layers of their SuperSpeed USB devices using the latest test solution from Tektronix.”

SuperSpeed USB will join other high speed serial standards such as 8 Gb/s PCI-Express and SATA 6 Gb/s as one of the more demanding technologies, requiring advanced test and measurement instruments such as the industry leading Tektronix DPO/DSA70000 oscilloscope series and analysis software. The Tektronix oscilloscopes can acquire signals up to 8 Gb/s, at or above the 5th harmonic, enabling greater margin and fidelity for demanding compliance and debug testing. With the higher bit rate, SuperSpeed USB receivers will also need equalization at the receiver because the signal eye will be closed after traveling through PCB traces, connectors, and cables. This equalization stress testing is facilitated by the Tektronix USB test solution including AWG7000B arbitrary waveform generators and DSA8200 Sampling Oscilloscopes.

“We welcome the contribution from Tektronix for the SuperSpeed USB standard including their support of the technology with new test tools and methodologies,” said Jeff Ravencraft, USB-IF Chairman. “Tektronix has provided excellent support for the USB-IF. Test sets like this will help enable developers to ensure their products are performing to the standard.”

SuperSpeed USB will adopt a new physical layer using two channels to separate data transmissions and acknowledgements to hit its higher speed targets. In place of the polling and broadcast mechanisms used in USB 2.0, the new USB 3.0 specification will employ a packet-routing technique and is architected so that devices can inform the host when they have data to send. The new link will continue the support the priority and bandwidth reservation that USB 2.0 currently has for the transmission of time sensitive data. In addition SuperSpeed USB supports a new feature called ‘Streams’ that may be used to enable native command queuing resulting in improved mass storage throughput.

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier