RF safety monitor protects from electromagnetic fields

Despite being a low-cost monitor, the RadMan Mobile uses tried-and-tested technology, developed by Narda over many years for its successful RadMan range.

Capable of measuring both E and H fields simultaneously, the device is particularly suitable for use when carrying out maintenance or repair work in the complex near-field conditions found close to antennas.

Warnings are provided by a loud audible alarm, which sounds when the level exceeds 50% of the maximum permissible exposure limit, and four LEDs that give an approximate indication of the measured field strength in steps of 12.5%, 25%, 50% and 100% of limit value.

The shaped frequency response means that the alarm threshold is always matched over the entire frequency range, so there is no need to adjust it according to the frequency of the field source.

As well as providing personal protection when worn on the outside of clothing, the RadMan Mobile can be used off the body for monitoring local signal strength, e.g. for locating leaks on waveguide components and coaxial connectors.

Powered by two AAA alkaline batteries with a life of up to 200 hours, the monitor weighs just 130g and measures 37 x 41 x 163mm.

Operating temperature range is specified as -10 to 55degC.

The unit is supplied with earphone, manual, belt bag and batteries, while optional accessories include a non-conductive tripod, a non-conductive extension rod for leak detection and a hard case.