Test & Measurement

Phase noise analyser enhanced up to 50GHZ

8th March 2024
Mick Elliott
0

The latest model of the R&S FSPN phase noise analyser and VCO tester from Rohde & Schwarz extends the frequency range for measurements from the previous maximum of 26.5 GHz up to 50 GHz.

The instrument provides both high speed measurements and also accuracy for characterizing sources such as synthesizers, VCOs, OCXOs and DROs.

Since a trade-off between increasing speed of test and higher accuracy is inevitable, users can choose the setting best suiting their application, enabling the FSPN suitable for production test and many oscillator development requirements.

The new R&S FSPN50 covers the frequency range from 1 MHz to 50 GHz and complements the existing 8 and 26.5 GHz models.

For engineers both developing and producing high quality oscillators, it supports applications in the Ka band from 26.5 to 40 GHz, and in the Q band (36 to 46 GHz) and in the lower V band up to 50 GHz.

Typical applications at these frequencies include commercial point-to-point wireless and microwave communication systems, satellite communications including high throughput satellite services, military satellite and communication systems operating up to 50 GHz, close-range targeting radars, and practically the entire 5G FR2 frequency range from 21.84 GHz to 50.20 GHz.

Excellent phase noise sensitivity is based on two low noise internal local oscillators enabling real-time cross correlation. The user can increase the number of correlations for higher accuracy or reduce them for higher speed. The current cross-correlation sensitivity gain is shown in real-time together with the current result trace.

Phase noise and amplitude noise are measured separately and simultaneously, providing both an excellent analysis of phase noise performance, and a direct route for identifying the cause of any problems, without any compromise in measurement speed.

Accurate VCO measurements are enabled by three low-noise DC sources. OCXO and DRO technologies as well as VCO can all be measured. For easy remote control and production automation, sequences of SCPI commands can be recorded automatically.

The new R&S FSPN50 phase noise analyser and VCO tester up to 50 GHz is now available from Rohde & Schwarz.

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier