Oscilloscope cascade increases channel counts

The DS8000-R series is a compact medium and high-end mixed signal digital oscilloscope designed on a Rigol ASIC chip and UltraVisionII technical platform.

It supports system integration of multiple devices.

Its cascaded rack mount and remote system operation can meet the system requirements for industrial automation test system and high channel research application.

With a sample rate of 10 GSa/s DS8000-R series oscilloscope has analogue bandwidth from 350 MHz, 1 GHz and 2 GHz, supporting multiple-device synchronous triggering, available to be extended to 512 channels.

The standard memory size is 500 Mpts for all channels.

It provides an excellent solution for users to meet their high-speed requirement for the system integration test and synchronization requirement for multiple-channel data acquisition.

Thin and light in body design and compact design for rack mount installation.

DS8000-R series is a 1U in height, half-rack in width. The 1U-height oscilloscope provides 4 analog input channels, 1 external trigger input channel and 1 AWG generator output channel (25 MHz). It can be used on the workbench or be installed into a cabinet. When used on workbench as stand-alone instrument it is equipped with a standard configuration of pads.

When installed into a cabinet, it is equipped with the rack mount kit. Versatile, it can be used in a laboratory or in the production and manufacturing environment.

-        Multiple DS8000-R series can be installed and supporting to be extend to 512 channels, capable of realising real-time synchronous acquisition.

-        For a stand-alone DS8000-R, its Jitter can be as low as 200 ps rms, delay as low as 150 ps, greatly improving the measurement accuracy.

-        Multi-device integration with stable performance, for a maximum of 128 sets at the same time for synchronous data-acquisition and transmission it can ensure stable an reliable measurement accuracy.

-        synchronisation module is available for integrated system scenario, and also to install on-site channel synchronisation calibration kit.

-        High speed interface in synchronisation module offer a high-speed data transfer up to 10 GB/s over optical interface 10 GE SFP+

-        With ULTRADAQ LITE RIGOL providing a multi-channel high-speed data acquisition PC software to control and display all channels.

A professional digital analysis can be achieved with new real time eye diagram and jitter analysis software including jitter trend measurements.

Versatile Trigger-, Math- and Displaying features (enhanced FFT @ 1 Mio points, Mask Test and Power Analysis) are available.

All Serial Bus protocol analysis (Decode/Trigger- Options), Build-in Voltmeter, Counter, totalizer, Arbitrary Function generator completes the integration of 6 in 1 instruments.

Various interfaces such as USB Host, USB Device, HDMI, LAN, 10 GE SFP+ and TRIG OUT are available.

As a special feature RIGOL offers all enhancements, such as higher bandwidths, serial decoding, functions via software Upgrade.

Customers can start with a simpler equipment and adapt it later to the advanced or more demanding measurement requirements in the laboratory.