National Instruments Delivers Industry-Leading RF Performance in PXI Form Factor

“Not only is the NI PXIe-5665 VSA the highest performing instrument in its class, but it is available at a fraction of the cost of traditional rack-and-stack instruments,” said Phil Hester, Senior Vice President of Research and Development at National Instruments. “Because our new PXI RF analyser combines high-end performance with modular flexibility into one compact, affordable package, engineers can now use the same instrument from design to production.”

The VSA combines the new NI PXIe-5603 downconverter with the new NI PXIe-5653 local oscillator synthesiser and the NI PXIe-5622, a 150 MS/s intermediate frequency (IF) digitiser. This combination creates an ideal solution for spectrum and wideband vector signal measurements over a frequency range from 20 Hz to 3.6 GHz with analysis bandwidths up to 50 MHz. The new VSA features an exceptionally low phase noise of -129 dBc/Hz at a 10 kHz offset at 800 MHz, an average noise level of -165 dBm/Hz, a third-order intercept point of +24 dBm and absolute amplitude accuracy of ±0.10 dB. These specifications make the NI PXIe-5665 the highest performing instrument in its class.

For modulated signal analysis, the VSA’s unique onboard self-calibration tool makes it possible to achieve an IF amplitude response of ±0.15 dB and IF phase linearity of ±0.1 degree. This accuracy facilitates exceptional error vector magnitude performance of less than 0.21 percent for a 256-QAM signal. The VSA’s flexible, modular architecture expands to provide phase-coherent acquisition for MIMO test, as well as a 20 GHz/s scan rate and peer-to-peer streaming for efficient spectrum monitoring. Additionally, engineers can operate the NI PXIe-5665 using its RF list mode function to deterministically step through a user-defined set of RF configurations using internal timing or an external trigger to significantly reduce test time.

Because the NI PXIe-5665 joins a product line of more than 1,500 software-defined PXI modular instruments, engineers can mix and match the VSA with a variety of modules and control an entire automated test system with NI LabVIEW graphical system design software. This makes PXI systems ideal for a multitude of automated test applications. Engineers can also fully take advantage of the VSA’s software-defined performance with RF software toolkits for LabVIEW, NI LabWindows™/CVI and .NET to test the latest RF and wireless communication standards including GSM/EDGE, WCDMA, LTE, WLAN and WiMAX.