Search results for "RECOM"

Yamaichi's latest USB stick meets the high protection requirements needed in the industrial sector. The Y-ConUSB-Stick-1 has a USB high-speed interface to USB 2.0 standard and a total storage capacity of 512 MB (up to 2GB on request) and, like the whole Y-Con series, meets the requirements of IP67/68/69K.

PETERMANN TECHNIK's low cost SMD crystal is available, with 2 or 4 solder pads, in the frequency range of 10.0 to 121.0MHz and with an extended temperature range of up to –40°C +125°C.

Linear Technology has introduced the LTC2393-16, a 16-bit SAR ADC that achieves an excellent 94dB SNR at sample rates up to 1Msps with no cycle latency. Operating from a single 5V supply and supporting a wide ±4.096V input range, the LTC2393-16 is well suited for many general purpose designs that require maximum signal swings to overcome background noise levels in demanding industrial environments.

Mouser Electronics, Inc today announced that it has been recognized by a panel of independent judges and nominated for the Elektra 2011 European Distributor of the Year Award for the second consecutive year. Last year, the global design-fulfillment distributor took home the top award, winning the prestigious Elektra 2010 European Distributor of the Year.

RECOM's R-78-switching regulator family was originally designed as a pin-compatible replacement for inefficient linear regulators. The new R-78C-family has high efficiency, low output ripple and this with 15 W/m³, i.e. doubled power density.

Master Bond EP11SIC is a cost effective, silver-filled epoxy-resin system featuring exceptionally high electrical and thermal conductivity .It offers the application convenience of a one component system in addition to flexible cure schedules so as to best meet specific processing requirements. It has superior adhesion to both metallic and nonmetallic substrates with a tensile strength greater than 6,000 psi and a tensile shear strength over 1,5...

Comprised of an aramid fiber reinforced epoxy adhesive for high performance structural bonding, Master Bond's EP30R features outstanding dimensional stability and enhanced impact resistance. This two part epoxy is formulated to cure at room temperature or more rapidly at elevated temperatures.

Vishay has announced a new throttle position sensor in hollow- and D-shaft versions that features Hall effect technology for applications in harsh environments. The Hall effect technology of the new 981 HE gives it the ability to perform in conditions involving high-frequency vibrations up to 20 G and shocks up to 50 G over a temperature range of –45°C to +125°C, providing a strong advantage over other technologies.

Vishay has announced two new series of Bulk Metal Foil ultra-high-precision Accutrim trimming potentiometers. The 3/4-in rectilinear devices offer extremely low end-to-end TCR of ± 5 ppm/°C (1285G) and ± 15 ppm/°C (1280G) from – 55 °C to + 125 °C, + 25 °C ref., and ± 25 ppm/°C through the wiper, load life stability of 0.1 % typical under full rated power at + 25 °C for 2,000 hours, and a < 0.05 % typical settability.

Mitsubishi Electric is introducing an Evaluation Board for its Intelligent Power Modules (IPMs) of the entire L1/S1 Series. The new board named EVBL1S1XX enable the design engineer to functionally test the features and the performance of these IPMs from Mitsubishi Electric. The board can be used as a reference design regarding layout and selected components.