Long range wireless multi instrument synchronization now also available for American market

High speed sampling at 100 MSa/s and 16 bit high resolution measuring are supported by the WCMI module. No long cabling is required between the scopes and the computer and no complicated setup is required, resulting in a simple and hassle free installation. The Wireless Multi Instrument Synchronisation Module type WCMI is the world's first module to wireless synchronise multiple oscilloscopes over a long distance of up to 400 meters and combine them to a single instrument. The WCMI module can be used with the TiePie engineering WiFiScope and Handyscope series 5 and 6 instruments.

The WCMI module is placed on the extension connector at the rear of each oscilloscope and the Multi Channel oscilloscope software automatically detects how many instruments are equipped with a WCMI module. All detected oscilloscopes, connected via WiFi, LAN or USB, are combined to one single oscilloscope with a total number of channels that equals the sum of the number of channels of the detected oscilloscopes. The WCMI module has an internal automatic time synchronisation system that takes care that all sample clocks of the oscilloscopes are synchronised. When a trigger occurs on one of the selected channels, all oscilloscopes will be triggered simultaneously and all signals will be synchronously visible on the display. The Wireless Multi Instrument Synchronisation Modules can be used both indoors as in the open field.

With the built-in RSSI meter, the receiving signal strength of each Wireless Multi Instrument Synchronisation Module can be checked. Two models are now available for the Wireless Multi Instrument Synchronisation Module WCMI:   - WCMI-8, for the 868 MHz band, region Europe   - WCMI-9, for the 915 MHz band, region America Yet again the TiePie motto applies: plug in and measure.