PC-based data-acquisition system is easy to use

The ability of the SL1000 to deliver independent, isolated-channel hardware at 100 MS/s per channel rates, with no compromise in bit resolution, memory depth, or streaming performance, makes it superior to high-speed digitisers that lack the isolation, attenuation, or bit resolution necessary for power electronics testing. It also offers benefits over PC-based platforms with fast streaming throughput, which sacrifice noise immunity, signal conditioning and hardware integrity.

In addition to its high-speed acquisition, the SL1000 will transfer data to a PC or record to its internal hard drive at rates up to 1.6 MS/s (3.2 Mbyte/s). Data transfer is via USB 2.0 or 1000BASE-T Gigabit Ethernet. A stand-alone mode also allows data logging without a PC.

The high-speed acquisition rate of 100 MS/s is maintained across all 16 channels, and is also available on a new 12-bit 1 kV isolation module with 20 MHz bandwidth. Acquisition trigger modes include normal, single and single (N) condition.

The SL1000 supports parallel testing, and can perform measurements simultaneously on up to four groups of signals with independent sample rates.

Eight module slots are provided for plug-in modules, of which twelve types are currently available for parameters including voltage, temperature, strain, acceleration and frequency. Each module incorporates its own analogue/digital convertor, and the instrument incorporates ‘plug & play’ automatic recognition of units and modules.

The SL1000 is quick and easy to use, with standard acquisition software including a set-up wizard providing intuitive operation.