Sponsored

This reference design provides a design template for implementing a three-level, three-phase, silicon carbide/gallium nitride (SiC/GaN) based ANPC inverter power stage. The use of fast-switching power devices makes it possible to switch at a higher frequency of 100 kHz, reducing the size of magnetics for the filter and increasing the power density of the power stage. The multilevel topology allows the use of 600-V rated power devices at higher DC...

Combining high density and maximum current, Molex FiT Families Power Connectors offer an extensive selection of wire-to-wire, wire-to-board and board-to-board configurations. Mega-Fit, Ultra-Fit, Mini-Fit, Micro-Fit 3.0, and Nano-Fit connectors deliver superior performance and design flexibility to meet the circuit and size parameters of virtually any mid-range power application. Contact your local TTI specialist now to get the best support!

The TL431 and TL432 devices are three-terminal adjustable shunt regulators, with specified thermal stability over applicable automotive, commercial, and military temperature ranges. The output voltage can be set to any value between Vref (approximately 2.5 V) and 36 V, with two external resistors. These devices have a typical output impedance of 0.2 Ω. Active output circuitry provides a very sharp turn-on characteristic, making these device...

Equipped with maintenance-free Supercaps (cycle stability >500,000), the compact DC UPS module BICKER UPSIC-1205D avoid downtime and data loss caused by power outages, brownouts or flicker. The modules for DIN-Rail mounting ensure the uninterruptible 12V power supply of DC loads in industrial and medical applications such as low-power embedded IPCs, edge gateways, motors, sensors, actuators, cameras. Data monitoring and preprogramming for self...

This paper examines the benefits of using an integrated powertrain solution to speed adoption of electric vehicles through power electronics. Implementation of wide band-gap semiconductor switches and isolated gate drivers are highlighted to illustrate the value of powertrain integration.

This reference design provides a compact system design capable of supporting motor acceleration and deceleration up to ±200 kRPM/s, which is a key requirement in many respirator applications. The design supports a number of offboard C2000 controllers including the TMS320F28027F, enabling a low-cost, sensor-less field oriented control (FOC). In addition, the design supports a wide input voltage range ...

Eaton Electronics provides reliable protection with very fast response times, low clamping voltage and high peak current capability in a host of electronic equipment. Explore the TVS, MLV, MOV, Thyristors and Polysurg™. A complete OV solution provider for both data and power lines – now available at TTI. 

Infineon's portfolio covers power ranges from kilowatts to megawatts and includes power semiconductors, gate drivers, microcontrollers, and authentication solutions. With advantages such as high-frequency operation, high power density, and reduced switching losses that allow for reaching high levels of efficiency in any battery charging system, Infineon's CoolMOS™ and CoolSiC™ MOSFETs are suitable for DC-EV fast charging designs. Avai...

Activated by the touch of a finger, CG series switches are designed for mounting under a non-conductive front face (glass or polycarbonate).  CP series' IK10 robustness and unlimited life are perfect for self-service applications.  Totally sealed (IP68 and IP69K), the PBA range is perfectly suited for humid environments or for sectors requiring a regular cleaning of control panels. 

The nPM1100 PMICs feature a highly efficient step-down buck regulator that delivers up to 150mA of current at a selectable output voltage of 1.8V, 2.1V, 2.7V, or 3.0V. The nPM1100 EK Evaluation Kit integrates into applications without the need to create custom test hardware.