Sponsored

These AEC-Q200-compliant inductors feature 30G vibration resistance, a 1µH to 100µH inductance range, 4.3mΩ to 334mΩ DC resistance range, and an operating temperature range of -55°C to +155°C (including self-temperature rise). 

The Texas Instruments ISO1212 is a 24V digital input receiver with 3 kV RMS isolation, providing reliable signal conversion and protection for industrial automation systems. It ensures robust performance in harsh environments with high electromagnetic compatibility.

If someone asked you what topology to use for an isolated, low-power output, chances are your first thought would be a flyback. Although a flyback is an excellent topology with benefits such as low cost, low component count and ease of adding additional outputs, it still has several drawbacks. The field-effect transistor (FET) and rectifier ringing associated with flyback transformer leakage inductance create electromagnetic interference (EMI), r...

Drive high-resolution, ultra-wide automotive displays with FPD-Link IV dual video output synchronization features. Synchronous dual DisplayPort output from a single DS90UH984 deserializer or quad-OLDI from synchronized dual deserializers can drive multiple, co-located panels to support pillar-to-pillar automotive displays.

Historically, automotive electronics have been powered off the same 12-V lead-acid battery used to start the vehicle. Even with surges as high as 42 V, which could occur if the generator were running and the battery cable was disconnected, voltages stay in the safety extra-low voltage (SELV) range below 60 VDC. 

The very compact BICKER DC401W with 94% efficiency is a contact-cooled DC/DC converter with ATX outputs, designed for industrial applications. It features a 6-36VDC input and delivers 400W of continuous fanless power. The 1U converter is engineered for 24/7 reliable operation in harsh environments, supporting an extended operating temperature range of -20 to +70°C. Built with high-quality components like polymer aluminium capacitors, it ensur...

The ADS131M08 is a eight-channel, simultaneously-sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) that offers wide dynamic range, low power, and energy-measurement-specific features, making the device an excellent fit for energy metering, power metrology, and circuit breaker applications.

The NXP FRDM-MCXN236 board combines one MCXN236 with a 64Mbit external serial flash supplied by Winbond. The board offers a high-speed USB circuit, one FXLS8974CFR3 accelerometer sensor, TJA1057GTK/3Z CAN PHY, DA7212 Audio codec (DNP), DMIC sensor SPK0641HT4H-1, RGB LED, push buttons, and MCU-Link debug probe circuit. The board is compatible with Arduino shield modules and mikroBUS headers.  

The nRF9161 SiP includes a programmable Arm Cortex-M33 system-on-chip (SoC), an RF front-end, a comprehensive LTE modem with GNSS and DECT NR+ capability, a power management system (PMIC), and the necessary passives and crystals. Nordic Semiconductor nRF9161 SIP is housed within a compact 10mm x 16mm design and is certified for global operation.

This downloadable reference guide explores the causes and types of Electromagnetic Interference (EMI), and discusses the measures to reduce it, avoiding the need for an expensive and time-consuming redesign.