Sponsored

This design implements a three-phase energy meter with Wi-Fi connectivity. The e-meter system on chip (SoC) performs all metrology functions and control the SimpleLink™ Wi-Fi transceiver. The smart meter data can then be displayed on any Wi-Fi connected device via a standard web browser

This application report explains the hardware and software applications required for the MSPEXP430F5529LP and MSP-EXP430F5529 boards to work with four Android mobile devices. It addressescustomers questions on the software and hardware items needed for the MSP430 USB device andsoftware stack to enumerate and communicate with Android mobile devices.

The TPSF12C3-Q1 evaluation module (EVM) is designed to evaluate the performance of the TPSF12C3-Q1. The solution improves the common-mode (CM) electromagnetic interference (EMI) filter in three-phase AC power systems. The TPSF12C3-Q1 IC provides a low-impedance path for CM noise in the frequency range of interest for EMI measurement and helps to meet prescribed limits for EMI standards.

The PCIM Europe 2023 will soon open its doors again and invites the entire power electronics industry to Nuremberg, Germany from 9 – 11 May 2023. Don’t miss the meeting hotspot and experience a world of power electronics at the largest PCIM Europe ever.  

The TPSF12C1-Q1 evaluation module (EVM) is specifically designed to conveniently evaluate the performance of the TPSF12C1-Q1 active filter IC. The solution improves the common-mode (CM) electromagnetic interference (EMI) signature in single-phase AC and 3-wire DC power systems. The TPSF12C1-Q1 IC provides a low impedance path for CM noise in the frequency range of interest for EMI measurement and meets prescribed limits for EMI standards, such as...

The BQ25176M is an integrated 800-mA linear solar charger for 1-cell Li-Ion, Li-Polymer, and LiFePO4 batteries with continual charge mode and battery tracking VINDPM. The device has a single power output that charges the battery. When the system load is placed in parallel with the battery, the charge current is shared between the system and the battery

Including different types of sensor solutions such as temperature, pressure, position, ultrasonic, and thermal validation. The medical products are used in applications such as patient monitoring, respiratory care, critical care, medical instrumentation, and surgical assemblies. 

In today’s highly connected world, more products than ever rely on battery power. Batteries are everywhere, from cordless power tools to robot vacuums, and even the e-bikes and electric vehicles you see on your commute. These products and many others like them utilize battery management systems (BMS) to ensure power is safely supplied throughout the product.

Oscilloscopes by RIGOL are well known for superior technical characteristics and quality at attractive prices. RIGOL is now setting new standards with the DHO1000 series of oscilloscopes with a vertical resolution of 12-bits. Various models are available with a sampling rate of 2GSa/s, 2 or 4 channels, bandwidth of 70, 100 or 200 MHz and memory depth of up to 100Mpts, starting from as low as EUR 699;  and: deliverable immediately!

The TPS25946EVM eFuse Evaluation Board allows reference circuit evaluation of Texas Instruments (TI) TPS25946 eFuse. The TPS25946 device is a 2.7 V to 23 V, 5.5-A eFuse with integrated 28.3-mΩ FET. The TPS25946 family of eFuses have reverse current protection when disabled, bi-directional current flowing capability when enabled, adjustable overcurrent, inrush current, short-circuit, overtemperature protections, adjustable overcurrent transi...