Sponsored

The AWR2243 BoosterPack plug-in module from Texas Instruments is an easy-to-use evaluation board for the single-chip AWR2243 mmWave sensing device. AWR2243BOOST contains everything required to start developing using the MMWAVE-STUDIO environment and the DCA1000 real-time data capture adapter.

The SimpleLink CC2642R-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU) targeting Bluetooth 5 Low Energy automotive applications. The device is optimized for low-power wireless communication in applications such as car access including passive entry passive start (PEPS) and remote keyless entry (RKE), battery management systems (BMS), car sharing, piloted parking, cable replacement, and smartpho...

The 16-bit DAC80501, 14-bit DAC70501, and 12-bit DAC60501 (DACx0501) digital-to-analogue converters (DACs) from Texas Instruments are highly accurate, low-power devices with voltage-output.

The DRV887x family of devices from Texas Instruments are flexible motor drivers for a wide variety of applications. The devices integrate an N-channel H-bridge, charge pump regulator, current sensing and regulation, current proportional output, and protection circuitry.

The TLV320ADC5140 from Texas Instruments is a Burr-Brown high-performance, audio analogue-to-digital converter (ADC) that supports simultaneous sampling of up to four analogue channels or eight digital channels for the pulse density modulation (PDM) microphone input.

The DS90UH941AS-Q1 from Texas Instruments is a dual DSI to FPD-Link III bridge serializer designed for automotive infotainment applications. When paired with an FPD-Link III deserializer, the DS90UH941AS-Q1 can supply 1- or 2-lane high-speed serial streams over cost-effective, 50Ω, single-ended coaxial cables or over 100-Ω, differential shielded twisted-pair (STP) and shielded twisted-quad (STQ) cables.

The DRV3245E-Q1 device from Texas Instruments is a FET gate driver IC for three-phase motor-drive applications. The device is intended for high-temperature automotive applications and is designed according to the applicable requirements of ISO 26262 for functional safety applications.

The DRV8305-Q1 device from Texas Instruments is a gate driver IC for three-phase motor-drive applications. The device provides three high-accuracy half-bridge drivers, each capable of driving a high-side and low-side N-channel MOSFET.

The DRV8343-Q1 device from Texas Instruments is an integrated gate driver for three-phase applications. The device provides three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs.

The DRV8343S-Q1EVM evaluation module from Texas Instruments is a 6V to 60V, 20A, a highly configurable 3-phase brushless DC (BLDC) motor drive and control evaluation platform designed for 12-V to 24-V automotive systems based on the DRV8343S-Q1 automotive smart gate driver.