Torque sensor plays critical role in collecting drone data

This sensor is a TorqSense from Sensor Technology in Banbury and is as innovative as the latest generation of drones. Its wireless operation makes it quick and easy to install, yet it is capable of generating vast amounts of accurate data.

Medium altitude long endurance (MALE) drones or UAV (unmanned aerial vehicles) typically fly at 10,000-30,000ft for 24hrs to 48hrs. They are used for recognisance, surveillance and surveying, by both civilian organisations and the military. Because of the duration of their flights, their controls must be reliable and accurate otherwise the risk of losing the craft would be unacceptably high.

Resembling a conventional fixed wing aircraft, the principals of MALE drone flight control are well established. Ian Maher of Deva Technologies in Wrexham said: “High performance servo motors are used to position the flight control surfaces. Our test rig’s role is to put the motors through long duration tests to make sure they stay within specification, even after prolong exposure to the arduous operating conditions they are likely to encounter.”

In essence the TorqSense transducer constantly measures the power output at the motor shaft and this is compared to the instantaneous current draw. By taking a large number of individual readings over the duration of the test period an accurate torque-load curve can be plotted for each motor and compared with the expected values.

TorqSense is highly innovative in that it does not need to physically contact the shaft it is monitoring. Instead sensing is achieved through a radio frequency link. Two tiny piezoelectric combs are attached to the shaft of the motor under test, perpendicular to one another and at 45° to the axis of the shaft. These form half of a Wheatstone bridge circuit, which is in radio contact with the other half in the main body of the TorqSense.

“When the shaft rotates a phenomenon known as Surface Affect Waves causes one comb to expand and the other to contract, changing their electrical resistance in proportion to the speed of rotation” explained Ian. “This unbalances the bridge and generates a signal indicating the torque value.

“It imparts no extra load onto the shaft, so measurements are true and calculations are simple. The rig produces data in real time and records the torque curve for analysis and traceability.”

Significantly, because TorqSense is essentially wireless it is easy to set up, there being no cables there is no need for delicate and fiddly slip rings. This means test rigs can be both set up and operated easily.

Maher again: “It also means we can just as easily take the TorqSense off one test rig and fit it to another. Thus we expect to use each one on multiple projects – not only do we save money by not having to buy a new one every time, but we save again because we have become familiar with the technology and are now highly skill at installing, calibrating and using them.”