Renewables
MPPT25 Maximum Power Point Tracking Solar Battery Charge Controller
The Intronics Power MPPT25 Solar Charge Controller continually tracks the maximum power point of the solar panel array, adjusting the circuit parameters approximately two times per second to maximize energy transfer from the array to the battery bank.
F-Automatic tracking of solar panel maximum power point
-Two or three stage charging (selectable)
-High energy conversion efficiency (94-97%)
-Tracking of MPPT to within 2% -Temperature compensated
-LCD display and LED status indicators
-User adjustable set points
-12V or 24V system capability (selectable)
-25 amp output rating
-Maximum panel input voltage 80 VDC
-Maximum battery voltage 65 VDC
-25 amp auxiliary load output
-Reverse connection protection
-Output current automatically limited to 27 amps
-All common grounds
W30 Series DC/DC MODULES
The W30 Family of high efficiency DC/DC converters offer power levels of up to 30 Watts, exceeding that of other products with the same Industry-Standard Pinouts, while providing much smaller footprints. With a wide input voltage range and single outputs, ranging from 1.5 to 15 Volts, these converters provide versatility without sacrificing the board space. All models feature an input filter and microcontroller-based protection features. The open frame construction allows very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices to achieve superior efficiencies (up to 94%), reliability, high performance and low cost solution to systems designers.
Specifications & Features Summary
• No minimum load required
• On/Off pin control
• -40°C to +85°C ambient operation
• Output adjustment +/-10% range
• 1500V, 10MΩ input-to-output isolation
• Output overcurrent protection
• Input Under voltage protection
• Input Over voltage protection
• Synchronous rectification topology
• MTBF of up to 1,000,000 hours @ 50°C (Bellcore)
• Over Voltage protection
• Over Temperature protection
• Please add suffix “A” or “B”, depending on Pinout
• Please add suffix “N” for Negative Logic
• Delivers up to 30W in 1” x 2” package with Industry-Standard Pinouts
• UL 60950 pending, TUV EN60950 and CSA C22.2 No. (Pending)
Applications
• Servers, Switches and Data Storage
• Networking Gear
• Wireless Communications
• Data Communications
• Distributed Power Architecture
• Telecommunications
• Semiconductor Test Equipment
• Industrial / Medical