XP's DIN rail AC/DC power supply series offers up to 92% efficiency

The 80 Watt DRS80 model measures just 32 x 102 x 124 mm (1.26 x 4.0 x 4.88 inches), and the 240 Watt DRS240 model measures 60 x 113 x 124 mm (2.36 x 4.60 x 4.88 inches). The compact nature of the DRS series yields above average power density for DIN rail units of up to 4.5 Watts per cubic inch.



Unlike some competitor products, the DRS series accommodates the universal input range of 85 – 264 VAC without the need for any input range selectors. This makes the series suitable for a wide variety of high line and low line applications.



The series provides the output voltage variants of 12, 24 or 48 VDC. The outputs are capable of being adjusted above the nominal voltages. The 12 VDC output can be increased up to 15 VDC, the 24 VDC to 28.5 VDC and the 48 VDC up to 56 VDC. Being able to provide such a wide range of output voltage adjustment allows customers to deploy the same power supply in a variety of different configurations. All models can accommodate a peak load 150% of nominal rating for up to a maximum of 4 seconds. This suits applications that need a high startup current or those where short peaks are anticipated. In this way, a lower power rated and less expensive power supply can be specified instead of a higher rated unit. The 120 Watt and 240 Watt models have a DC OK volt free contact as standard.

Capable of operating over a wide range of temperatures from -20 degrees C, the DRS80 and DRS120 can provide full power output up to + 60 degrees. The DRS240 operates without derating to + 50 degrees C. All units operate above these temperatures with derating to +70 degrees C.



The DRS series is fully approved to worldwide industrial and commercial safety standards including EN60950, UL508 and UL1604 for hazardous environments.