TI Introduces DC/DC Power Module for 3-GHz DSP Systems

Based on TI's extensive T2 family of devices, the new PTH08T240F incorporates TurboTransT technology, which optimizes the power module's transient response and reduces the amount of output capacitance by up to eight times. The technology significantly reduces the peak output
voltage deviation under transient load conditions, while saving the customer the cost and board space for additional capacitors.

The PTH08T240F has a wide input voltage range of 4.5 V to 14 V, and provides up to 92 percent power efficiency at 1.8-V output. The module's output voltage is adjustable from 0.7 V to 2 V, and features
over-current protection and programmable under-voltage lockout. In addition, the PTH08T240F offers over-temperature protection, on/off inhibit control, differential remote sense and 1.5 percent DC output regulation.

The module is the first power management device that meets the core voltage tolerance requirements of TI's new TCI6487 DSP. The single chip, multi-core, 3-GHz DSP requires a core voltage rail between 0.9 V and 1.1 V with a source impedance of 2 milli-ohms. The TCI6487's voltage tolerance requirement for transient loads of up to 5 A is only 15 mV, which the PTH08T240F easily supports
with only 3,000 µF of external output capacitance. This achievement allows wireless infrastructure base station OEMs using the new DSP to simplify their power system designs, while achieving optimal power performance and efficiency.

SmartSync, another element of this module, allows for switching frequency synchronization of multiple modules, thereby simplifying electromagnetic interference (EMI) noise suppression tasks and reducing
input capacitor ripple current requirements. The PTH08T240F also includes the Auto-TrackT sequencing feature, which simplifies simultaneous power-up and power-down of multiple power modules in the
system.