SynQor - 270V DC/DC Converters Provide 120W of Power While Reducing Dissipated Heat 50%

This effectively reduces the dissipated heat by half as compared to other 120W converters in the industry standard full-size (FL) package. Fully encased using SynQor's QorSeal™ technology, the MQFL-270 series is constructed to withstand and survive the harsh environments and long-term storage requirements of avionics, missile and other flight applications.

High-Rel MQFL-270 dc/dc converters operate at full power from -55°C to +125°C and accept continuous input voltages of 155-400V while permitting higher transient input voltages of 475V for 1 second. Single output modules are offered in eleven versions ranging from 1.5V to 28V, including 1.5V, 1.8V, 2.5V, 3.3V, 5.0V, 6.0V, 7.5V, 9.0V, 12V, 15V and 28V. Single output power and current levels are as high as 120W and 40A, respectively. Using the active current sharing function, an unlimited number of single output converters can be paralleled to achieve kilowatts of power. Dual output converters are also available with output voltages of +/-5V, +/-12V and +/-15V with the capability of providing up to 80% power from either output.

The feature-rich series includes fixed-frequency switching, no opto-isolators, remote sense, clock synchronization, primary- and secondary-side enable, continuous short-circuit protection, input under-voltage lockout and input over-voltage shutdown. The Hi-Rel MQME-270 EMI filter modules rated at 320W (2A) provide >80dB of differential attenuation (and >60dB of common-mode attenuation) at 500kHz. Used together, MilQor dc/dc converters and EMI filters permit compliance with MIL-STD-704(A-F), RTCA/DO-160-E (Section 16), MIL-STD-1275B, and DEF-STAN 61-5(6/5), as well as MIL-STD-461(C-E) and RTCA/DO-160E (Section 22; Lightning).

SynQor's unique QorSeal packaging approach provides a conduction-cooled mechanical assembly around an SMT-constructed power circuit that is low-profile, light-weight, and shielded. Its non-hybrid construction has been designed per NAVSO-P3641-A guidelines, with all components derated per MIL-HDBK-1547A. They are qualified to MIL-STD-810F, as well as to SynQor's internal First-Article (consistent with MIL-STD-883F), Storage-Survivability, and On-Going Life-Test procedures. As a result, the MilQor product line will survive the most severe long-term storage and operational environments encountered in military, avionic, and high-reliability applications.

Compared with hybrid chip-and-wire converters, the MQFL-270 portfolio of Hi-Rel dc/dc converters is a competitively priced solution manufactured in the USA in an AS9100B certified facility. Sample quantities are readily available, and production quantities are available with a standard lead-time of 12-16 weeks ARO, depending on screening options. For additional information, please see MilQor Hi-Rel Series.