Surge stopper ICs eliminate need for heatsink

This operation regulates the output voltage to a safe level, allowing the loads to operate through the input over-voltage event.

During normal operation (SWITCHON mode), the LTC7860 turns on the external MOSFET continuously, passing the input voltage through to the output.

An internal comparator limits the voltage across the current sense resistor and regulates the maximum output current to protect against overcurrent faults.

Comments Ian Fantham, Sales Director, Astute Electronics: “Traditionally, designers need to include a large, heavy heatsink to allow operation to continue, just for the rare over-voltage instances. Because the LTC7860 uses an efficient switching topology, designers can use a much smaller heatsink, or no heat sink at all.”

Available in small, thermally-enhanced 12-lead MSOP packaging, the devices feature an adjustable timer which limits the time that the LTC7860 can spend in overvoltage or overcurrent regulation.

When the timer expires, the external MOSFET is turned off until the LTC7860 restarts after a cool down period.

By strictly limiting the time in PROTECTIVE PWM Mode when the power loss is high, the components and thermal design can be optimized for normal operation and safely operate through high voltage input surges and/or overcurrent faults. An additional PMOS can be added for reverse battery protection.

Applications include military power systems to MIL1275, ISO7637 vehicle systems and general power supplies for industrial and telecoms equipment.