Dual high-voltage Power Supply with 12VDC input and 312VDC and variable 3KV to 6.5 KV Output CE/TUV certification updated to EN 60950-1:2006+A11

The Dual high-voltage Power Supply consists of two separate circuits combined into one PC assembly using Thru-Hole & SMD technology, housed in metal enclosure. These circuits are individually testable and have completely separate test requirements as such. The two regulator circuits are a 312 V@ 0 - 50mA Power Supply Circuit and a 3.0 KV to 6.5 KV@ 0-50uA (programmable) High-Voltage Supply Circuit. These circuits are DC/DC parallel quasi-resonant flyback converter type and require an external 12VDC source as input for operation.
The power supply Protection Circuitry includes Reverse input polarity (option): Input protected from reversed polarity; polarity change circuit.; Input over voltage protection (option): Input protected for Vin.> 27.0V + 10% DC input.; Short circuit current: Automatic electronic circuit disables output short circuit for shorted output conditions. Regulator will not power up with output short.; Input current protection: Protected by output current limit / Foldback circuitry and input fusing.; Overload protection: Automatic circuit shuts regulator down for overloads exceeding 150% of max. current output. Once regulator shuts down,control input must be sequenced to start regulator again.; Output voltge status. Open collector TTL-L, VSAT < 0.7 VDC, IOL< .3A sink current when Vout > 260 VDC; System Interface for Fault Detection / Isolation.

The unit is fully certified with Safety approvals: UL 60950, CUL to 22.2 # 950, TUV to EN 60950 and CE compliance.

Overall max. dimensions are 5.75L x 4.25W x 2.06H inch (146.5L x 106.5W x 50.5Hmm). The Input connector is a Fully polarized, Nylon UL 94V-0 housing, MATE-N-LOK connector, 9 pins, “Live Split” model, AMP p/n: 640501-1; Header mates with AMP p/n: 640521. The (312V) Output connector is a Fully polarized Nylon UL 94V-0 housing, universal MATE-N-LOCK, 600V insulation range .100 in Dia, AMP p/n: 1-480699-0 2 pins, 19A max, Pin AMP p/n: 350561-1. Connector color: Natural, balkheaded through metal case and (+,-) red, black AWG 18 stranded wires soldered to Mother PCB. Header mates with AMP p/n 350582 or equivalent. The (3-6.5)KV Output connector is a 20 KV min. Polyester UL 94V-0 housing, color Black, receptacle, captive to metal case by 1/2-20 nut, same material AMP p/n: 862197-5 with Pin Assembly AMP p/n: 1-66400-0.

Custom, Bespoke, or Customized enclosure colors, housing designs, circuitry, functions, output cord types and lengths, as well as customized packaging available upon request.

Ruggedized IP42 to IP68 versions available upon request. According to BS EN 60529 and IEC 529, IP52 signifies that the medical (60601-1) power supply is Protected against dust - limited ingress as well as Protected against direct sprays of water up to 15 deg from the vertical. IP42 test report and certification available upon request. Fully encapsulated and potted IP68 versions also available.

The power supply can be supplied with customer designated output plugs, many of which are stocked at GlobTek New Jersey USA, GlobTek Germany, and Suzhou China locations.