Experience greater suppression of frequency fluctuations

Compared to regular COT control, Torex’s HiSAT-COT control enables greater suppression of frequency fluctuations caused by the load and input voltage. The response speed is eight times faster than previous products, and the output voltage drop is reduced by 50%.

PWM control (XC9257) or PWM/PFM auto switching control (XC9258) can be selected for the operation mode, and a fast response, low ripple and high efficiency are obtained over the entire load range, from light loads to heavy loads.

The output voltage can be set internally to a value of 0.8-3.6V (±2.0%) in steps of 0.05V. The only external components used include a coil and capacitor. Oscillation frequencies are 1.2 and 6.0MHz, allowing selection of the optimum frequency for the application.

By stopping all circuits during standby, the quiescent current is reduced to 1.0μA or less. The soft start function starts the IC in a quick 0.30ms (TYP.). An internal UVLO function forcibly shuts off the internal Pch MOS driver transistor when the input voltage drops to 2.0V or less. The B type includes a CL discharge function that discharges the output capacitor during standby. Packages include the SOT-25 and the USP-6C, contributing to space saving during the design stage.