Fully Digital 800 Watt Bulk Front-End Power Supply from Emerson Network Power Features 80 PLUS Gold Standard Efficiency

With a high power density of 19.05 W/in3 (1.16 W/cm3) in a slim-line rack-mounting package, DS800SL-3 power supplies enable system designers to minimize space requirements in enterprise servers and similar space-constrained applications.

The new DS800SL-3 is a fully digital design; it features a built-in I2C serial bus interface and uses the industry-standard PMBus™ communications protocol. Developed primarily for systems employing distributed power architectures, the power supply has a wide input voltage range of 90 to 264 Vac and is rated for 800 watts output power. The main 12 Vdc payload output is programmable by plus/minus 10 percent, and can deliver up to 65.7 A continuously. An auxiliary ‘always on’ 5 Vdc output, rated at 2.4 A, is also provided for powering server management circuits. Both outputs are tightly regulated, have no minimum load requirement, and offer remote sensing – the 12 Vdc output can compensate for a load bus drop of up to 200 mV.

Opposite-end ac input and dc outputs facilitate fast replacement in the field, and the dc output card edge connector is compatible with the Intel® standard for high availability power supplies for the always-on enterprise market. The power supply features built-in Oring and active load sharing facilities, and supports hot swap operation for fault tolerant and N+1 redundancy applications, allowing as many as six power supplies to be connected in parallel. Up to four DS800SL-3 power supplies can be programmed to share current from their 12 Vdc outputs; if each power supply is delivering 40-50 percent of its rated output to the load, current will be shared to an accuracy of 5 percent, simplifying users’ implementation of high availability power schemes significantly.

The power supplies have an operating temperature range of -10 to 50 degrees Celsius with no derating, and feature a built-in cooling fan with automatic speed control; forward and reversed airflow versions are available to simplify integration with the rack’s cooling layout.

The power supplies are comprehensively protected against fault conditions, including input undervoltage, output short-circuit, overload and overvoltage. The power factor correction and output converter stages are both monitored for overtemperature conditions, and correct operation of the fan is also checked. DS800SL-3 power supplies have a demonstrated mean time between failure (MTBF) of 100,000 hours, running at full load and 25 degrees Celsius ambient, and are backed by a comprehensive two year warranty.