Home > Products > Up to 20 DC circuits protected by new 1RU GMT Fuse Panel from UNIPOWER

Power

Up to 20 DC circuits protected by new 1RU GMT Fuse Panel from UNIPOWER

8th July 2010

ES Admin

0 0

UNIPOWER’s latest addition to the already popular DPG Series of GMT Fuse distribution panels is designed for users who need to protect DC circuits in a rack mounted system. The DPG1U Series provides distribution and overload protection for up to 10 circuits per side in A/B feed configuration and with this new version, up to 20 circuits in single-feed mode. The 1U high unit can be mounted in either a 19 or 23in. rack.

The panels can be configured to operate from 12, 24 or 48VDC, positive or negative ground. Fuse alarm is indicated be a red LED on the front panel and by Form C relay contacts.

These new panels are designed to be configured and operated either as a single feed with up to 20 circuits with a maximum of 150A capacity or as dual-sided with each side capable of 80A. Dual-sided panels can be separately configured to provide dual voltage distribution out of one panel. Fuse sizes from 0.5 to 12A can be accommodated.

To allow this distribution panel to be aligned with other rack-mounted equipment, the DPG1U can be mounted from the front of the rack, with offsets every quarter-inch from front to back.

All models meet the requirements of all relevant safety standards including UL60950-1, CSA22.2 No. 60950-1 and EN60950-1. The DPGF1U Series units are RoHS compliant.