DC/DC converters provide up to 30W of output power

13th July 2017

Alice Matthews

0 0

Datasheet

A range of 'Cool Power Technologies' 5V input (4.5-9V) 5V, 6A and 3.3V, 6A 30W 1×1 DC/DC converters have been introduced by Semiconductor Circuits. These open frame or optional encapsulated modules provide up to 30W of output power at an output voltage of 3.3V or 5VDC (12 and 15V versions will also be available – consult factory.) This module is suitable for industrial or distributed power architecture applications. These modules are compliant with the standard 1×1 and 1×2 pinout and interface standards.

It has a wide input voltage range of 4.5-9VDC (3-9Vin for the 3.3V version) and provides 2,250VDC input to output isolation in open frame configuration, 1,600VDC for the encapsulated module.

The 5Vin CP30 series is ROHS II Directive 2011/65/EU Compliant, meets UL/EN 60950 requirements and is UL94 V-0 flammability rated. The module complies with all of the typical industry requirements including no load operation, 15V input voltage transient and pre-biased load startup.

Other features include: fixed-frequency operation, auto-restart over-voltage, over-current and over-temperature protections, undervoltage lockout and ±10% output voltage trim. Remote ON/OFF is standard with positive or negative logic options available. Modules can also be ordered without enable pin and trim pin (remove 'P' or 'N' from model number.)

The modules feature a standard 1×1/1×2 pinout with dimensions of 23.9x23.9x8.9mm (0.94x0.94x0.35"). The encapsulated versions are standard 25.4x25.4x10.2mm (1x1x0.4").