4:1 input open frame 1/8th brick DC-DC converter

These modules are compliant with DOSA footprint and interface standards and provide 2250 VDC input to output isolation. Output voltages of 3.3, 5, 12, 15 and 24Vdc are available. Custom values are also being manufactured for particular industries such as Solar Power, Aircraft and POE communications.

The CPE series is a high efficiency module product family with efficiencies exceeding 90% from ½ load through full load. They meet EN 60950 basic insulation requirements and are UL94 V-0 flammability rated. Safety certification by TUV has been granted for most members of the family and the remaining ones are in the certification process. The modules comply with typical industry requirements including no load operation, 2 X nominal input voltage transient and pre-biased load startup.

Other features include: fixed-frequency operation, auto-restart OVP, OCP & OTP protections, UVLO, remote sense and +10%/-20% output voltage trim using industry standard equations. Remote ON/OFF is standard with positive or negative logic options available.

This product set features standard 1/8^th brick pinout and dimensions of 2.3” L x 0.9” W (58.4mm x 22.9mm.) It has a maximum height of 10.3mm (0.404”) which accommodates tight card spacing with minimal airflow blockage of downstream components.